Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned tasks are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Assess engine condition
    • Internal combustion engine is run and components are assessed visually or aurally to determine condition of engine under load, in accordance with workplace procedures
11. Internal combustion engine condition is tested whilst under load, using appropriate test equipment, in accordance with workplace procedures and manufacturers' specification
12. Remove auxiliary systems
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
13. Auxiliary systems are removed, marked and labelled, to facilitate replacement, in accordance with workplace procedures
14. Load device is uncoupled and removed, in accordance with workplace procedures
15. Overhauland maintain engine
    • Internal combustion engine is systematically dismantled, and component parts are clearly marked for identification, in accordance with workplace procedures
16. Internal combustion engine components are examined, and dimensional inspection is performed, in accordance with workplace procedures, to determine conformance to manufacturers' specification
17. Faulty components are replaced, in accordance with manufacturers' specification
18. Internal combustion engine components are reassembled, and necessary adjustments are made, in accordance with workplace procedures and manufacturers' specification
19. Replace auxiliary systems
    • Load device is coupled, in accordance with workplace procedures and manufacturers' specification
20. Auxiliary equipment is maintained, as required, in accordance with workplace procedures and manufacturers' specification
21. Auxiliary equipment is aligned and installed, in accordance with workplace procedures and manufacturers' specification
22. Internal combustion engine is started and function tested, in accordance with workplace procedures and manufacturers' specification
23. Internal combustion engine operating characteristics are monitored, recorded and adjustments are made to obtain optimum performance, in accordance with workplace procedures and manufacturers' specification
24. Auxiliary equipment and/or components are overhauled, as required, in accordance with workplace procedures and manufacturers' specification
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
25. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
26. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
27. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---