Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned tasks are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove associated equipment
    • Work notations are confirmed, in accordance with workplace procedures
11. Associated generator equipment is disconnected, in accordance with workplace procedures
12. Associated generator equipment is removed, in accordance with workplace procedures
13. Associated generator equipment is inspected for abnormalities, in accordance with workplace procedures
14. Perform generator maintenance
    • Generator maintenance is performed, in accordance with workplace procedures and manufacturers' specification
15. Generator is dismantled, clearly marked for identification and relevant data or sketches are noted or drawn, in accordance with workplace procedures
16. Components are prepared for reassembly, in accordance with manufacturers' drawings or manuals and workplace procedures
17. New components are inspected, in accordance with workplace procedures, to ensure compliance with manufacturers' specification
18. Dimensional inspection is performed, in accordance with workplace procedures, on generator and components to ensure compliance with manufacturers' specifications
19. Components are reassembled for testing, in accordance with workplace procedures and manufacturers' specification
20. Components are levelled, aligned and coupled, in accordance with workplace procedures and manufacturers' specification
21. Replace generator associated equipment
    • Associated generator equipment is replaced and connected, in accordance with workplace procedures
22. Generator is rotated and checks are carried out, in accordance with workplace procedures, to ensure operating conditions are in accordance with manufacturers' specifications
23. Modifications outside of manufacturers' specifications are approved by appropriate personnel and are documented, in accordance with workplace procedures
24. Final inspection is completed, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
25. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
26. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
27. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---