Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
   • Work area is prepared, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed for work preparation
4. Resources are obtained and inspected, in accordance with workplace procedures for compliance with job specifications
5. Relevant plans, drawings and manuals are selected and interpreted, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Maintain fixed fire protection systems
    • Dismantling of fire protection system equipment is completed, in accordance with workplace procedures
11. Faulty components are repaired or overhauled, in accordance with workplace procedures and fire protection system requirements
12. Replacement equipment or items are inspected, in accordance with workplace procedures, to confirm compliance with fire protection system specifications
13. Modifications or alterations are undertaken, in accordance with workplace procedures and fire protection system requirements
14. Maintenance is performed, in accordance with workplace procedures and fire protection system requirements
15. Conduct in service testing
    • In-service testing is carried out, in accordance with workplace procedures and fire protection system requirements
16. In-service testing is carried out, in accordance with relevant statutory regulations
17. Abnormalities, faults and deviations from fire protection system specifications are logged and reported to appropriate personnel, in accordance with workplace procedures and legislative requirements
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
18. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
19. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
20. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---