Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
5. Relevant plans, drawings and manuals are selected and interpreted, in accordance with workplace procedures
6. Correct materials and components for work are determined, obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Inspect and dismantle equipmentor components
    • Mechanical equipment and/or components are dismantled and marked, in accordance with workplace procedures, to facilitate reassembly
11. Damaged or faulty mechanical equipment and components are inspected and assessed, in accordance with workplace procedures, against operational and manufacturers' specifications
12. Faulty mechanical equipment and/or components are identified, in accordance with workplace procedures, for repair, replacement or manufacture
13. Repairfaulty equipmentor components
    • Methods of repair are determined, in accordance with workplace procedures and approved engineering techniques
14. Repairs are completed, in accordance with workplace procedures, using approved engineering techniques
15. Replacement parts are selected, assessed against mechanical equipment or component specifications and are fitted using approved engineering techniques, in accordance with workplace procedures
16. Manufacture parts or components
    • Mechanical equipment parts and component specifications are determined, in accordance with workplace procedures, using approved engineering techniques
17. Appropriate materials are selected, in accordance with the workplace procedures
18. Mechanical equipment parts and components are manufactured or fabricated, in accordance with workplace procedures using approved engineering techniques
19. Completed work is inspected, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
20. Reassemble equipmentorcomponents
    • Mechanical equipment and/or components are reassembled, in accordance with workplace procedures
21. Final assembly is inspected, in accordance with workplace procedures, to ensure compliance with operational or manufacturers' specification
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
22. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
23. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
24. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---