Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Test electronic electricalwiring systems
    • Isolations for work are confirmed, in accordance with workplace procedures
11. Electronic electrical wiring systems are tested using appropriate plans, drawings and manuals, in accordance with workplace procedures
12. Electronic electrical wiring systems, including enclosures and/or supports, are inspected, in accordance with workplace procedures, prior to testing to ensure absence of damage, defects or deterioration
13. Fixed electronic electrical wiring is tested, as appropriate, and results are documented to confirm compliance with job specification
14. Test electronic electricalequipment
    • Isolations are confirmed, in accordance with workplace procedures site requirements
15. Electronic electrical equipment is tested using appropriate plans, drawings and manuals, in accordance with workplace procedures
16. Test conditions are confirmed and equipment is inspected, in accordance with workplace procedures, to ensure absence of any damage, defects or deterioration
17. Electronic electrical equipment is tested using appropriate testing techniques, in accordance with workplace procedures
18. Electronic electrical equipment test results are documented to confirm compliance with job specification
19. Commission electronic electricalequipment
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements
20. Electronic electrical equipment is commissioned using appropriate plans, drawings and manuals, in accordance with workplace procedures
21. Electronic electrical equipment is set up, in accordance with workplace procedures, operational requirements and manufacturers' specifications
22. Testing and monitoring procedures are followed, and results are documented to ensure equipment operates within manufacturers' specifications
23. Final inspection is carried out, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
24. Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
25. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
26. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---