Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures and
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace and site procedures
10. Install complex electronic instrumentationequipment
    • Isolations are confirmed, in accordance with workplace procedures
11. Electronic instrumentation equipment is assembled, positioned and secured, in accordance with workplace procedures, plans, drawings and manuals
12. Conductors are run, secured, glanded and terminated to job specifications, in accordance with workplace procedures
13. Final inspection is carried out, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
14. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
15. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
16. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---