Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Carry out maintenance
   • Isolations are confirmed, in accordance with workplace procedures
   • Wind turbine control system equipment is maintained using appropriate plans, drawings and manuals in accordance with workplace procedures
   • Calibration or adjustments are carried out to ensure wind turbine control system equipment operates within manufacturers' requirements, in accordance with workplace procedures
   • Trips and alarms of wind turbine control system equipment are calibrated or adjusted, in accordance with workplace procedures
   • Final inspection is carried out, in accordance with the workplace procedures
2. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are maintained and stored in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
3. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
4. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
5. Resources are obtained and inspected for compliance with job specification
6. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
7. Correct materials and components for work are obtained and inspected for compliance with job specification
8. Work is planned sequenced and prioritised, in accordance with workplace procedures
9. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
10. Work area is prepared, in accordance with workplace procedures
    • Isolations are confirmed, in accordance with workplace procedures
11. Wind turbine control system equipment is maintained using appropriate plans, drawings and manuals in accordance with workplace procedures
12. Calibration or adjustments are carried out to ensure wind turbine control system equipment operates within manufacturers' requirements, in accordance with workplace procedures
13. Trips and alarms of wind turbine control system equipment are calibrated or adjusted, in accordance with workplace procedures
14. Final inspection is carried out, in accordance with the workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
15. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
16. Tools and equipment are maintained and stored in accordance with workplace procedures
17. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---