Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Conduct maintenance
   • Wind turbine generator equipment is replaced, in accordance with manufacturers' specifications and workplace procedures
   • Documented service checklists, or similar documentation, are followed, in accordance with workplace procedures
   • Diagnostic testing and data from monitoring systems are used to identify wind turbine generator components requiring maintenance
   • Wind turbine generator equipment is dismantled for maintenance, in accordance with manufacturers' specifications and workplace procedures
   • Approved workplace techniques are used to enable identification or reassembly of components or equipment, in accordance with workplace procedures
   • New components are obtained and inspected, in accordance with workplace procedures, for compliance with manufacturers' specifications
   • Wind turbine generator equipment or components are tested, monitored and adjusted, in accordance with manufacturers' specifications and workplace procedures
2. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are maintained and stored, in accordance with workplace procedures
   • Maintenance completion details are finalised, in accordance with workplace procedures
3. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
4. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
5. Resources are obtained and inspected for compliance with job specification
6. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Isolations for work are requested, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
   • Wind turbine generator equipment is replaced, in accordance with manufacturers' specifications and workplace procedures
10. Documented service checklists, or similar documentation, are followed, in accordance with workplace procedures
11. Diagnostic testing and data from monitoring systems are used to identify wind turbine generator components requiring maintenance
12. Wind turbine generator equipment is dismantled for maintenance, in accordance with manufacturers' specifications and workplace procedures
13. Approved workplace techniques are used to enable identification or reassembly of components or equipment, in accordance with workplace procedures
14. New components are obtained and inspected, in accordance with workplace procedures, for compliance with manufacturers' specifications
15. Wind turbine generator equipment or components are tested, monitored and adjusted, in accordance with manufacturers' specifications and workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
16. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
17. Tools and equipment are maintained and stored, in accordance with workplace procedures
18. Maintenance completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---