Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace and site procedures
10. Remove complex mechanicalseals for maintenance
    • Isolations for work are confirmed, in accordance with workplace procedures
11. Complex mechanical seals are identified, in accordance with workplace procedures
12. Complex mechanical seals are removed, in accordance with workplace procedures
13. Complex mechanical seals are inspected for abnormalities, in accordance with workplace procedures
14. Maintain complex mechanicalseals
    • Maintenance is performed on complex seals, in accordance with workplace procedures and manufacturers' specifications
15. Complex mechanical seal assemblies are dismantled, in accordance with workplace procedures, using approved engineering principles
16. Components and/or parts are clearly marked and sketches produced, as required, in accordance with workplace procedures, for identification
17. Component wear and clearances are determined using precise measuring techniques and approved testing equipment, in accordance with workplace procedures and manufacturers' specifications
18. Components found to be faulty are repaired or replaced, in accordance with workplace procedures, to conform with manufacturers' specifications
19. New components are inspected for compliance and are prepared for reassembly, in accordance with workplace procedures and manufacturers' specifications
20. Component parts are refitted to complex mechanical seal assemblies, in accordance with workplace procedures and manufacturers' specifications
21. Modifications or alterations to complex mechanical seals are undertaken, in accordance with workplace procedures
22. Replaceor install complexmechanical seals
    • Equipment is prepared for complex mechanical seal replacement, in accordance with workplace procedures
23. Complex mechanical seals are replaced, in accordance with workplace procedures and manufacturers' specifications
24. All fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
25. Machinery and/or plant are test run, monitored and adjusted, as required, in accordance with workplace procedures and manufacturers' specifications
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
26. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
27. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
28. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---