Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Perform alignment
   • Isolations for work are confirmed, in accordance with workplace procedures
   • Measurements are taken, and recorded, to facilitate compliance with manufacturers' specifications and job requirements
   • Levelling and alignment calculations are performed, and sketches are made, in accordance with workplace procedures
   • Power generation plant and machinery is levelled and aligned, and adjustments are made, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
   • Final alignment inspections are undertaken, and fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
   • Power generation plant and machinery is test run, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications
2. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
   • Tools and equipment are maintained and stored in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
3. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
4. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
5. Resources are obtained and inspected, in accordance with workplace procedures for compliance with job specification
6. Relevant plans, drawings and manual are selected and used, in accordance with workplace procedures
7. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with the job specification
8. Work is planned, sequenced and prioritised, in accordance with workplace procedures
9. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
10. Work area is prepared, in accordance with workplace procedures
    • Isolations for work are confirmed, in accordance with workplace procedures
11. Measurements are taken, and recorded, to facilitate compliance with manufacturers' specifications and job requirements
12. Levelling and alignment calculations are performed, and sketches are made, in accordance with workplace procedures
13. Power generation plant and machinery is levelled and aligned, and adjustments are made, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
14. Final alignment inspections are undertaken, and fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
15. Power generation plant and machinery is test run, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
16. Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
17. Tools and equipment are maintained and stored in accordance with workplace procedures
18. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---