Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare forwork
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturer specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with the workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove complex mechanicalvalves for maintenance
    • Isolations for work are confirmed, in accordance with workplace procedures
11. Complex mechanical valve is disconnected, in accordance with workplace procedures
12. Complex mechanical valve is removed, in accordance with workplace procedures
13. Complex mechanical valve is inspected for abnormalities, in accordance with workplace procedures
14. Perform complex mechanicalvalve maintenance
    • Maintenance is performed, in accordance with workplace procedures and manufacturers' specifications
15. Complex mechanical valve is dismantled, clearly marked for identification and sketches are drawn, in accordance with workplace procedures
16. Components are prepared for reassembly, in accordance with workplace procedures, manufacturers' drawings or manuals
17. New components are inspected, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications
18. Dimensional inspection is performed, in accordance with workplace procedures, using precision measuring devices to ensure compliance with manufacturers' specifications
19. Components are reassembled for testing, in accordance with workplace procedures and manufacturers' specifications
20. Modifications or alterations are undertaken, in accordance with workplace procedures and manufacturers' specifications
21. Components are levelled, aligned, coupled and connected, in accordance with workplace procedures and manufacturers' specifications
22. Complex mechanical valves are pressure tested, monitored and adjusted, in accordance with workplace procedures and manufacturers' specifications
23. Replaceorinstall complex mechanicalvalves
    • Equipment is prepared for valve replacement, in accordance with workplace procedures
24. Complex mechanical valve is replaced, in accordance with workplace procedures and manufacturers' specifications
25. Complex mechanical valve is connected, in accordance with workplace procedures and manufacturers' specifications
26. Final inspection is completed, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
27. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
28. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
29. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---