Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace and site procedures
10. Verify electronic equipmentfault
    • Normal performance and function of equipment is ascertained using manufacturers' manuals, in accordance with workplace procedures
11. Fault indicators, technical information and diagnostic techniques are used to verify reported faults, in accordance with workplace procedures
12. Electronic equipment faults are reproduced and are monitored, in accordance with workplace procedures
13. Find electronic equipmentfault
    • Isolations for work are confirmed, in accordance with workplace procedures
14. Electronic equipment components, wires, cables, terminations and support fixings are inspected for faults, in accordance with workplace procedures
15. Diagnostic techniques are selected and used to determine faults, in accordance with workplace procedures
16. Components are disconnected, in accordance with workplace procedures, to enable accurate test measurements of suspected faulty components ensuring back feed readings do not occur
17. Test and measurement instruments are used, in accordance with workplace procedures, manufacturers' specifications and job requirements
18. Determine cause of electronic equipmentfault
    • Appropriate personnel are consulted, in accordance with workplace procedures
19. Information from fault indicators and maintenance records are used, in accordance with workplace procedures
20. Repair electronic equipment fault
    • Isolations are confirmed, in accordance with workplace procedures site requirements
21. Faulty, worn, damaged or unsecured components are replaced or repaired, in accordance with workplace procedures
22. Electronic equipment parts and components are selected and replaced, as required, in accordance with workplace procedures and manufacturers' specifications
23. Components disconnected for testing are reconnected, and all terminations are checked to ensure they are electrically and mechanically sound, in accordance with workplace procedures
24. Faults are repaired, in accordance with workplace procedures
25. Final inspection is performed, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
26. Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
27. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
28. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---