Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare forwork
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Diagnose complex electricalfault
    • Normal performance and function of complex and High Voltage electrical equipment is reviewed, in accordance with workplace procedures
11. Complex and High Voltage electrical equipment fault indicators and technical information are used, in accordance with workplace procedures, to diagnose and verify reported faults
12. Complex and High Voltage electrical equipment symptoms are reproduced and monitored, if possible, in accordance with workplace procedures
13. Find complex electrical equipmentfault
    • Isolations for work are confirmed, where appropriate, in accordance with workplace procedures
14. Complex electrical equipment components, wires, cables, terminations and support fixings are inspected, in accordance with workplace procedures, for faults
15. Diagnostic techniques are selected and used to determine complex electrical equipment faults, in accordance with workplace procedures
16. Components are disconnected, in accordance with workplace procedures, to enable test measurements of suspected faulty components whilst ensuring no back feed readings occur
17. Test and measurement instruments are used, in accordance with workplace procedures and manufacturers' specifications
18. Determine cause of complex electrical equipmentfault
    • Appropriate personnel are consulted, if required, in accordance with workplace procedures
19. Information from fault indicators and maintenance records are used, in accordance with workplace procedures
20. Conclusions about the nature and cause of the fault from analysis of evidence is undertaken, in accordance with workplace procedures
21. Repair complex electrical equipment fault
    • Faulty, worn or damaged complex electrical equipment components are repaired, in accordance with workplace procedures
22. Complex electrical equipment components disconnected for testing are reconnected, in accordance with workplace procedures, with terminations checked to ensure they are electrically and mechanically sound
23. All faults are repaired, in accordance with workplace procedures
24. Final inspection of complex electrical equipment is performed, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
25. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
26. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
27. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---