Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Documentation of programming is presented to appropriate personnel, in accordance with the workplace procedures
   • Workplace procedures are modified, where necessary, to comply with new program requirements
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with the job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Work is planned, sequenced and prioritised, in accordance with workplace procedures
7. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
8. Work area is prepared, in accordance with workplace procedures
9. Write and load programs
   • Testing and measurement instruments and software packages are selected and used to enable completion of program writing, in accordance with workplace procedures
10. Programming data is written with sequence and variables determined, in accordance with operating parameters of the control system
11. Control system program is up loaded, in accordance with workplace procedures
12. Test operating parameters
    • Testing and measurement instruments to review operating parameters are selected and used, in accordance with workplace procedures
13. Programming data is reviewed and confirmed, in accordance with workplace procedures
14. Sequence and variables are tested, in accordance with workplace procedures, to confirm operating parameters of control system is being met
    • Documentation of programming is presented to appropriate personnel, in accordance with the workplace procedures
15. Workplace procedures are modified, where necessary, to comply with new program requirements
16. Work is completed and appropriate personnel are notified, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---