Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Work is planned, sequenced and prioritised, in accordance with workplace procedures
7. Work area is prepared, in accordance with work requirements and site procedures
8. Conduct maintenance on wind turbine generatormechanical systems
   • Faulty wind turbine generator mechanical system equipment is replaced, in accordance with manufacturers' specifications and workplace procedures
9. Documented service checklists, or similar, are followed, in accordance with workplace procedures
10. Diagnostic testing and data from monitoring systems is used to identify components requiring maintenance
11. Wind turbine generator mechanical system equipment is dismantled for maintenance, in accordance with manufacturers' specifications and workplace procedures
12. Maintenance techniques are used to enable identification or reassembly of components, in accordance with workplace procedures
13. New components are obtained and inspected for compliance with manufacturers' specifications
14. Turbine generator mechanical system equipment is tested, monitored and adjusted, as required, in accordance with manufacturers' specifications and workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
15. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
16. Tools and equipment are maintained and stored, in accordance with workplace procedures
17. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---