Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Diagnose instrumentation systemfault
    • Normal performance and function of instrumentation system is ascertained, in accordance with workplace procedures
11. Fault indicators, appropriate technical information and diagnostic techniques are identified and used, in accordance with workplace procedures, to diagnose faults
12. Faults are reproduced and monitored, if possible, in accordance with workplace procedures
13. Find instrumentation system fault
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
14. Instrumentation system equipment, components, wires, cables, terminations and support fixings are inspected, in accordance with workplace procedures, for faults
15. Diagnostic techniques are used, in accordance with workplace procedures, to determine the fault
16. Components are disconnected, in accordance with workplace procedures, to enable test measurements of suspected faulty components without back feed readings occurring
17. Test and measurement instruments are used, in accordance with workplace procedures, manufacturers' specifications and job requirements
18. Determine cause of instrumentation systemfault
    • Appropriate personnel are consulted about faults, if required, in accordance with workplace procedures
19. Use is made of information from fault indicators and maintenance records, in accordance with workplace procedures
20. Conclusions about the nature and cause of the fault from analysis of available evidence is used, in accordance with workplace procedures
21. Repair instrumentation system fault
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
22. Faulty, worn or damaged equipment and components are repaired, in accordance with workplace procedures
23. Parts and components are replaced, as required, in accordance with workplace procedures and manufacturers' specifications
24. Instrumentation system equipment and components are disconnected for testing and are reconnected, in accordance with workplace procedures, and terminations are then checked to ensure they are electrically and mechanically sound
25. Faults are repaired, in accordance with workplace procedures
26. Final inspection is performed, in accordance with workplace procedures
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
27. Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
28. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
29. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---