Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to undertake HV switching procedures to a given schedule
   • Switching and work schedules, plans, drawings, workplace procedures and material lists are received and confirmed
2. Job requirements and workplace procedures are identified and communicated with relevant personnel
3. Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for HV switching are obtained and confirmed for the purposes of the work to be performed
4. Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
5. Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures
6. Relevant authority is obtained to perform work in accordance with workplace procedures
7. Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
8. Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
9. Traffic management plan is confirmed as being applied in accordance with workplace procedures
10. Carry out HV switching procedures to a given schedule
    • WHS/OHS, sustainable energy and environmental principles and practices are monitored and followed to reduce incidents in accordance with workplace procedures
11. Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures
12. HV switching procedures to a given schedule are applied to ensure completion in agreed timeframes, to quality standards and with a minimum of waste in accordance with workplace procedures
13. Communications with switching control officer are established and maintained throughout the isolation operation in accordance with workplace procedures
14. Electrical equipment, associated circuits, line/network or worksite to be switched, including paralleling, is isolated and proved de-energised using appropriate devices and earthed, where required, in accordance with workplace procedures
15. Unplanned events are responded to in accordance with workplace procedures
16. Relevant permits are prepared and issued in accordance with workplace procedures
17. Quality checks of work are undertaken in accordance with workplace procedures
18. Complete HV switching procedures to a given schedule
    • Completed switching is checked against work schedule and anomalies are reported in accordance with workplace procedures
19. WHS/OHS and environmental incidents are reported in accordance with workplace procedures, as required
20. Worksite is rehabilitated, cleaned and made safe in accordance with workplace procedures
21. Plant, equipment and tools are cleaned, checked and returned to service in accordance with workplace procedures
22. Relevant work permits are signed off, safety devices removed and system re-energised and returned to service in accordance with workplace procedures
23. Work records, reports and/or documentation are completed in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---