Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare/plan to develop LV switching schedules
   • Work schedules, including drawings, plans, requirements, established procedures and material lists, are obtained and analysed, as necessary, by site inspection and the extent of the preparation of the work determined for planning and coordination
2. Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures
3. Relevant requirements and established procedures for the work are communicated to all personnel and identified for all worksites
4. Hazards are identified, work health and safety (WHS)/occupational health and safety (OHS) risks assessed and control measures prioritised, implemented and monitored, including emergency exits kept clear, to ensure safe systems of work are followed and according to established procedures
5. Relevant work permits are secured to coordinate the performance of work according to requirements and/or established procedures
6. Resources, including personnel, equipment, tools and personal protective equipment (PPE), required for the job are identified, scheduled and coordinated and confirmed safe and in technical working order
7. Clients/customers are provided with possible solutions and/or options within the scope, acceptable cost and requirements
8. Personnel participating in the work, including plant operators and contractors, are fully briefed and respective responsibilities coordinated and authorised, where applicable, in accordance with established procedures
9. Liaison and communication issues with others/authorised personnel, authorities, clients and land owners are resolved and activities coordinated to carry out work
10. Carry out the development of LV switching schedules
    • WHS/OHS and sustainable energy principles and practices to reduce the incidents of accidents and minimise waste are monitored and actioned in accordance with requirements and/or established procedures
11. Hazard warnings and safety signs are recognised and hazards and assessed WHS/OHS risks are reported to immediate authorised personnel for directions according to established procedures
12. Remedial actions are taken to overcome any shortfalls encountered in the work schedule according to requirements and/or established procedures
13. Development of LV switching schedules is carried out in accordance with the work schedule and requirements and/or established procedures
14. Essential knowledge and associated skills are applied in the safe development of LV switching schedules to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements
15. Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills according to requirements
16. Ongoing checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality outcome is achieved for the client/customer and to a community/industry standard
17. Complete development of LV switching schedules
    • Work undertaken is checked against work schedule for conformance with requirements, anomalies reported and solutions identified in accordance with established procedures
18. Relevant work permits) are signed off and plant is returned to service and client/customer advised in accordance with requirements
19. Accidents and/or injuries are reported and followed up in accordance with requirements/established procedures
20. Work completion records, reports, as installed/modified drawings and/or documentation and information are confirmed, processed and appropriate personnel notified

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---