Google Links
Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge
Elements and Performance Criteria
- Plan for fault finding and rectification in power system substation environment
- Job requirements and workplace procedures are identified and communicated with relevant personnel
- Hazards are identified, work health and safety (WHS)/occupational health and safety (OHS)risks assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
- Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
- Risk control measures are identified, prioritised, implemented and evaluated against the work schedule
- Equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
- Liaison and communication issues with authorised personnel, authorities, clients and land owners are resolved to facilitate work, as required
- Personnel participating in work are fully briefed and responsibilities confirmed in accordance with workplace procedures
- Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
- Carry out fault finding within the substation environment
- Cardiopulmonary resuscitation (CPR), rescue from live electrical apparatus and other related safety procedures are in place in accordance with job requirements and/or workplace procedures
- Safe working documentation is acquired and requirements completed in accordance with workplace procedures
- Requirements for lifting, climbing, working at heights, confined spaces and use of power tools/equipment are followed in accordance with workplace procedures
- Hazard warnings and safety signs are recognised and hazards and assessed WHS/OHS risks are reported to immediate authorised personnel for directions/preventative actions taken in accordance with workplace procedures
- Faults in power system substation are diagnosed and rectified to ensure completion in agreed timeframes, to quality standards and with minimum waste in accordance with workplace procedures
- Faults are located, identified and affected circuits isolated in accordance with the work schedules, job requirements and workplace procedures
- Faults in power system substation control circuits are rectified in an agreed timeframe and to workplace quality standards with a minimum of waste
- Unplanned events in the diagnosis and analysis of faults are responded to in accordance with workplace procedures
- Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills in accordance with requirements
- Circuit functions are restored in accordance with work schedules, job requirements and workplace procedures
- Quality checks of work are undertaken in accordance with industry standards and workplace procedures
- Complete fault finding within the substation environment
- Safe working documentation is surrendered, and equipment made ready for service in accordance with workplace procedures
- Worksite is cleaned and confirmed safe in accordance with workplace procedures
- Tools, equipment and surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with workplace procedures
- Work records, reports and/or documentation are completed in accordance with workplace procedures
Range Statement