List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare site and inspect equipment | 1.1 Determine appropriate method for accessing tree – climbing or using an elevated work platform (EWP) – through discussion with work team 1.2 Determine location of above-and-below-ground services 1.3 Undertake a site-specific risk assessment by identifying work health and safety hazards and assessing risk 1.4 Confirm first aid and rescue personnel, equipment and procedures 1.5 Ensure work team member present, capable, willing and equipped to assist or perform aerial rescue operations 1.6 Prepare and carry out pre-operational and safety checks, on ropes, harnesses, tools and equipment 1.7 Select and use personal protective equipment 1.8 Record and implement work health, safety, site, environmental and traffic control measures |
2. Select climbing equipment | 2.1 Select harness and appropriate equipment for climbing 2.2 Inspect tree to determinelow risk access route through discussion with work team and seek feedback 2.3 Estimate tree height and load in relation to safe working limits of ropes and equipment 2.4 Determine the hold, release and grip attributes of rope 2.5 Select and use static and dynamic rope as required 2.6 Select and use triple locking carabiners 2.7 Determine limits, relative advantages and disadvantages of friction hitches |
3. Prepare to access tree | 3.1 Tie, dress, set and finish climbing knots and hitches 3.2 Communicate with work team during operations using voice, hand and whistle signals 3.3 Maintain awareness of power line safe approach distances and vegetation clearances 3.4 Select low risk anchor points in accordance with strength, suitability requirements and branch weight |
4. Prepare climbing spurs and gaffs for dismantling operations | 4.1 Prepare climbing spurs and gaffs for dismantling operations 4.2 Check all components of climbing spurs for defects and wear 4.3 Check gaff tip profile for correct dimensions using gaff gauge 4.4 Sharpen gaff tip cutting edge with file at defined angle using gaff gauge 4.5 Adjust climbing spurs to provide correct operator fit 4.6 Access and perform dismantling work using climbing spurs 4.7 Maintain separation of spurs 4.8 Maintain clearance distance between spurs and ropes |
5. Access and ascend tree | 5.1 Access and ascend tree using low risk access route with harness and lanyard 5.2 Ascend using single rope, double rope and selected friction hitch as required 5.3 Ascend using uni-ascenders, foot and hand ascenders, and other ascension devices as required 5.4 Use micrograbs, grigris and micro-pulleys as required for mobility and work positioning 5.5 Demonstrate ability to carry out change-overs as required 5.6 Set up redirects and belays using slings and anchors as required 5.7 Select multiple lines to climb trees and tree parts as required 5.8 Select multiple lines to perform tree operations as required |
6. Descend from tree | 6.1 Descend tree in a controlled manner 6.2 Remove all access equipment in a controlled manner 6.3 Check, clean and store access equipment 6.4 Clean and store personal protective equipment |
The candidate must be observed ascending and descending trees using advanced tree climbing practices.
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts. The candidate must provide evidence for and demonstrate:
appropriate method for accessing tree – climbing or using an EWP – through discussion with work team
determining location of above-and-below-ground services
undertaking a site-specific risk assessment by identifying work health and safety hazards and assessing risk
confirming first aid and rescue personnel, equipment and procedures
ensuring work team member present, capable, willing and equipped to assist or perform aerial rescue operations
preparing and carrying out pre-operational and safety checks, on ropes, harnesses, tools and equipment
selecting and using personal protective equipment and safety equipment
recording and implementing work health, safety, site, environmental and traffic control measures
selecting harness and appropriate equipment for climbing
inspecting tree to determine low risk access route through discussion with work team and seek feedback
estimating tree height and load in relation to safe working limits of ropes and equipment
determining the hold, release and grip attributes of rope
selecting and using static and dynamic rope as required
selecting and using triple locking carabiners
determine limits, relative advantages and disadvantages of friction hitches including: Tautline, Blake’s, Prussik, Klemheist, Valdetain, French Prussik and specialised variations
tying, dressing, setting and finishing climbing knots and hitches
communicating with work team during operations using voice, hand and whistle signals
maintaining awareness of power line safe approach distances and vegetation clearances
selecting low risk anchor points in accordance with strength, suitability requirements and branch weight
accessing and ascending tree using low risk access route with harness and lanyard
ascending using single rope, double rope and selected friction hitch as required
ascending using uni-ascenders and foot ascenders as required
using micrograbs, grigris and micro-pulleys as required for access and tree operations
demonstrating ability to carry out change-overs
setting up redirects and belays using slings and anchors
selecting multiple lines to access trees and tree parts
selecting multiple lines to perform tree operations
descending tree in a controlled manner
removing all access equipment in a controlled manner
cleaning and storing climbing equipment
cleaning and storing personal protective equipment
use of industry standard-terminology to describe climbing and the work environment.
The candidate must demonstrate knowledge of:
appropriate method of tree access
selection of climbing or EWP access
determination of location of above-and-below-ground services
site-specific risk assessment
first aid personnel, equipment and procedures
rescue personnel, equipment and procedures
work health, safety, site, environmental and traffic control measures
pre-operational and safety checks, on ropes, harnesses, tools and equipment
personal protective equipment
types of climbing ropes
dynamic and static ropes
rope characteristics
uses of climbing ropes
safe working limits of ropes
safe working limits of equipment
defects in ropes, tools and equipment
climbing harnesses and lanyards
climbing equipment
triple action carabiners
friction hitches including:
Tautline, Blake’s, Prussik, Klemheist, Valdetain, French Prussik and specialised variations
arborist knots
tying knots
dressing knots
setting knots
checking knots
finishing knots
industry voice, hand and whistle signals
low risk access routes
estimation of tree height
estimation of load
safe working limits
tree access techniques and equipment
strength and suitability requirements
single and double rope techniques
uni-ascenders and foot ascenders
micrograbs, grigris, micro-pulleys
use of climbing spikes of various lengths
change-overs
redirects and belays using slings and anchors
use of multiple lines to access trees and tree parts
advanced climbing techniques
low risk anchor points
maintenance of awareness of power lines
power line safe approach distances and vegetation clearances
controlled descent operations
controlled removal of access equipment
cleaning of equipment
storage of equipment.