Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AHCBEK311 Mapping and Delivery Guide
Transport bee hives by road to new apiary site

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AHCBEK311 - Transport bee hives by road to new apiary site
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to prepare, load and transport live bee colonies (hives) by road transport between apiary sites.The unit applies to beekeepers who operate apiaries under broad direction and take responsibility for their own work. They use discretion and judgement in the selection, allocation and use of available resources and to solve problems.State and territory legislation, regulations and local government by-laws apply in some jurisdictions to beehive ownership.The transport, siting and cross border movement of livestock including bee hives and must comply with state and territory transport, quarantine and biosecurity legislation, regulations and codes of practice.No vehicle licensing is required for individuals undertaking the work described in this unit. Where an individual is the nominated transport vehicle owner or driver, state and territory legislation, regulations, licencing and registration apply.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan road transport of hives to new apiary site
  • Identify destination and determine best route according to vehicle capability, job specifications, welfare of bees and health and safety in the workplace procedures
  • Calculate travel time and estimate time of arrival
  • Identify environmental hazards and assess environmental risks that impact on hive health during transport
  • Identify and assess health and safety risks for other road users
  • Prepare a hive transport plan and management strategy to address identified environmental risks to bee health and safety of people that may contact bees on route
  • Complete documentation for permits according to workplace procedures and regulations
       
Element: Prepare bee colonies for transport.
  • Assess each hive for heath and suitability for transport according to biosecurity procedures
  • Check hive structural stability in preparation for transport
  • Secure hive components according to workplace procedures
  • Secure the bees according to transport plan and hive management strategy
  • Clean hives of soil and weed contaminants according to biosecurity procedures
       
Element: Prepare vehicle for transport
  • Conduct vehicle operational checks according to workplace procedures
  • Prepare vehicle for transport conditions according to terrain, route and workplace procedures
  • Select and stow equipment and resources required for hive transport activities according to workplace procedures
  • Conduct biosecurity activities on vehicle, tools and equipment according to workplace procedures
       
Element: Load and secure bee colonies
  • Load the hives onto transport vehicle according to health and safety in the workplace requirements and hive handling procedures
  • Orient the hive on vehicle according to transport plan and hive management strategy
  • Secure the load according to workplace procedures and transport regulations
       
Element: Transport and monitor bee colonies
  • Transport bee hives to new apiary site according to workplace procedures and traffic regulations
  • Implement safety procedures to protect other road users according to hive transport plan
  • Monitor bee activity during scheduled transport breaks and take appropriate action according to management strategy
  • Check load stability and rectify according to road conditions and workplace procedures
       
Element: Unload and reinstate hives
  • Release the load safely according to hive transport procedures
  • Remove hives from transport vehicle according to health and safety in the workplace requirements, hive handling procedures and hive transport plan
  • Place hives according to apiary requirements and workplace procedures
  • Reinstate hives according to hive management strategy
       
Element: Record and report on transport activity
  • Assess and review the performance of the transport plan and hive management strategy
  • Report on performance elements according to workplace procedures
  • Update records for transport activity according to workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify destination and determine best route according to vehicle capability, job specifications, welfare of bees and health and safety in the workplace procedures 
Calculate travel time and estimate time of arrival 
Identify environmental hazards and assess environmental risks that impact on hive health during transport 
Identify and assess health and safety risks for other road users 
Prepare a hive transport plan and management strategy to address identified environmental risks to bee health and safety of people that may contact bees on route 
Complete documentation for permits according to workplace procedures and regulations 
Assess each hive for heath and suitability for transport according to biosecurity procedures 
Check hive structural stability in preparation for transport 
Secure hive components according to workplace procedures 
Secure the bees according to transport plan and hive management strategy 
Clean hives of soil and weed contaminants according to biosecurity procedures 
Conduct vehicle operational checks according to workplace procedures 
Prepare vehicle for transport conditions according to terrain, route and workplace procedures 
Select and stow equipment and resources required for hive transport activities according to workplace procedures 
Conduct biosecurity activities on vehicle, tools and equipment according to workplace procedures 
Load the hives onto transport vehicle according to health and safety in the workplace requirements and hive handling procedures 
Orient the hive on vehicle according to transport plan and hive management strategy 
Secure the load according to workplace procedures and transport regulations 
Transport bee hives to new apiary site according to workplace procedures and traffic regulations 
Implement safety procedures to protect other road users according to hive transport plan 
Monitor bee activity during scheduled transport breaks and take appropriate action according to management strategy 
Check load stability and rectify according to road conditions and workplace procedures 
Release the load safely according to hive transport procedures 
Remove hives from transport vehicle according to health and safety in the workplace requirements, hive handling procedures and hive transport plan 
Place hives according to apiary requirements and workplace procedures 
Reinstate hives according to hive management strategy 
Assess and review the performance of the transport plan and hive management strategy 
Report on performance elements according to workplace procedures 
Update records for transport activity according to workplace procedures 

Forms

Assessment Cover Sheet

AHCBEK311 - Transport bee hives by road to new apiary site
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCBEK311 - Transport bee hives by road to new apiary site

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: