Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AURVTT3021 Mapping and Delivery Guide
Select and use adhesives

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency AURVTT3021 - Select and use adhesives
Description This unit describes the performance outcomes required to select adhesives for specific trimming applications and determine methods of attaching materials.The unit involves identifying different adhesives for work requirements, preparing for work, and completing work processes, including clean-up.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Work applies to trimming technicians who perform a variety of trimming and upholstery activities to a range of vehicles or components, including marine, motorcycles, aircraft and recreational vehicles.Work requires individuals to demonstrate judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Work instructions and job specification are read and interpreted to determine job requirements, including adhesive types and attachment method
  • Workplace health and safety (WHS) requirements, including personal protective equipment (PPE) needs, are observed and addressed
  • Tools and equipment are identified, sourced and checked for safe and effective operation
  • Emergency procedures and equipment are identified
  • Information is accessed and interpreted from adhesive manufacturer specifications
  • Material applications and usage are compared with job requirements
       
Element: Select adhesives
  • Material safety data sheet (MSDS) information is sourced and interpreted
  • Adhesives appropriate for the task are selected, following environmental, statutory and regulatory authority requirements
       
Element: Prepare surfaces and apply adhesive
  • Surface and adhesive preparation is carried out according to adhesive manufacturer specifications
  • Adhesives are applied without causing damage to components or systems and in line with industry regulations and guidelines, WHS requirements and workplace procedures
       
Element: Clean up work area and maintain equipment
  • Adhesives and materials that can be reused are collected and stored according to workplace sustainability practices
  • Waste and scrap are removed following workplace procedure
  • Equipment and work areas are cleaned and inspected for serviceable condition according to workplace procedures
  • Faulty equipment is identified and tagged according to workplace requirements
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.

A person who demonstrates competency in this unit must be able to:

observe safety procedures and requirements

select methods and techniques appropriate to the circumstances

complete preparatory activity in a systematic manner

select and apply a range of fabric adhesives

follow workplace procedures and requirements as they apply to adhesive, tool and equipment use.

Context of, and specific resources for assessment

Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.

Assessment is to occur:

using standard workplace practices and procedures

following safety requirements

applying environmental constraints.

Assessment is to comply with relevant:

regulatory requirements

Australian standards

industry codes of practice.

The following resources must be made available for the assessment of this unit:

workplace location or simulated workplace

materials relevant to selecting and applying trim and fabric adhesives

equipment, and hand and power tools appropriate to selecting and applying trim and fabric adhesives

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.

Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.

Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.

Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

communication skills to follow workplace verbal instructions

initiative and enterprise skills to recognise a workplace problem or potential problem and take action

learning skills to identify sources of information, assistance and expert knowledge to expand skills, knowledge and understanding

literacy skills to:

read and follow information in written job instructions, quality procedures, specifications, standard operating procedures, charts, lists, drawings and other reference documents

document adhesive procedures and required parts

numeracy skills to calculate surface area and adhesive requirements

planning and organising skills to:

plan, use and follow job specifications when using adhesives

plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed on time

identify risk factors and take action to minimise them

problem-solving skills to:

refer problems outside area of responsibility to appropriate person and suggest possible causes

seek information and assistance as required to solve problems

self-management skills to:

select and use appropriate attaching equipment, adhesives, materials, processes and procedures

recognise own limitations and seek advice

follow workplace policies and documentation, such as codes of practice and attaching procedures

technical skills to:

use adhesive attaching workplace tools and equipment relating to the manufacture and re-covering of leather trimmed components, including the use of adhesives, specialist tools and equipment

technology skills to:

adapt to the use of adhesives and workplace tools and equipment

operate adhesive attaching equipment

use technology to collect and provide information on adhesive types

Required knowledge

WHS and personal safety requirements

adhesive application equipment

technical information relating to adhesive use

MSDS and product safety requirements

adhesive manufacturer specifications

adhesive selection, preparation and application procedures

procedures for the safe use of adhesive cleaning materials

workplace quality processes relating to selecting and applying adhesives in vehicles

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Method may include:

clamping

crimping

gluing

sewing.

Workplace health and safety requirements may include:

personal protective clothing and equipment

safe use of tools and equipment

workplace environment, including adequate workstation ventilation

safe handling of material

use of fire-fighting equipment

workplace first aid equipment

control of hazards and hazardous material and substances.

Personal protective equipment may include:

eye protection

personal protective clothing

safety footwear.

Emergency procedures may include:

extinguishing fires

workplace first aid requirements

workplace evacuation.

Information may include:

verbal, written or graphical instructions

product manufacturer specifications

catalogues

colour charts

vehicle details

material safety data sheets (MSDS)

diagrams and sketches.

Materials may include:

adhesives

fabric

vinyl

cleaning materials

leather.

Environmental requirements may include:

EPA requirements

federal, state or territory environmental regulations

specific environmental considerations for:

products used in the process

activities undertaken in the process

waste-management regulations

clean-up management.

Statutory and regulatory authorities’ requirements may include:

federal, state or territory, and local authorities administering Acts

industry regulations

codes of practice

Australian standards.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions and job specification are read and interpreted to determine job requirements, including adhesive types and attachment method 
Workplace health and safety (WHS) requirements, including personal protective equipment (PPE) needs, are observed and addressed 
Tools and equipment are identified, sourced and checked for safe and effective operation 
Emergency procedures and equipment are identified 
Information is accessed and interpreted from adhesive manufacturer specifications 
Material applications and usage are compared with job requirements 
Material safety data sheet (MSDS) information is sourced and interpreted 
Adhesives appropriate for the task are selected, following environmental, statutory and regulatory authority requirements 
Surface and adhesive preparation is carried out according to adhesive manufacturer specifications 
Adhesives are applied without causing damage to components or systems and in line with industry regulations and guidelines, WHS requirements and workplace procedures 
Adhesives and materials that can be reused are collected and stored according to workplace sustainability practices 
Waste and scrap are removed following workplace procedure 
Equipment and work areas are cleaned and inspected for serviceable condition according to workplace procedures 
Faulty equipment is identified and tagged according to workplace requirements 

Forms

Assessment Cover Sheet

AURVTT3021 - Select and use adhesives
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AURVTT3021 - Select and use adhesives

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: