List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Review and clarify task to conduct off-form vertical concrete operations.
Review task specifications and check to make sure they are in accordance with legislation, regulations and codes of practice.
Review work health and safety (WHS) requirements for the task in accordance with safety plans and policies.
Identify safety signage and barricade requirements.
Review environmental requirements for the task in accordance with environmental plans and legislative requirements.
Select plant, tools and equipment, check for serviceability and rectify or report any faults.
Calculate material quantity requirements.
Acquire materials for the task and locate them safely ready for use.
Erect identified safety signage and barricades, and fit personal protective equipment (PPE).
Set out the location and size of pour to requirements of job drawings and specifications.
Prepare equipment specifically associated with the installation of slip-formwork or jump-formwork concrete projects.
Prepare, place and fix edge formwork with plumb and align to specifications.
Apply form release agent to slip-formwork or jump-formwork with appliance or machine to specifications.
Check reinforcement, accessories and cast-in fittings for conformity with design and specifications.
Position reinforcement and accessories in accordance with engineering drawings and specifications.
Tie and/or weld reinforcement in correct placement in accordance with engineering drawings and specifications.
Determine sequencing of concrete from specifications.
Place concrete evenly into formwork in layers and consolidate to specification, avoiding material segregation and using approved compaction method.
Screed and finish concrete surface to specification ensuring cast-in fittings are clear.
Add curing compound in accordance with specifications.
Continue placement cycle after slip-form or jump-form formwork is progressed by riggers, avoiding cold joint.
Clear work area and dispose of, reuse or recycle materials in accordance with legislation, regulations, codes of practice and task requirements.
Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications and workplace requirements.

Assessment Cover Sheet

CPCCCO3051 - Conduct off-form vertical concrete operations

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

CPCCCO3051 - Conduct off-form vertical concrete operations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: