Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
CPCPRE2001 Mapping and Delivery Guide
Brace and prop prefabricated concrete elements
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | CPCPRE2001 - Brace and prop prefabricated concrete elements |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Access requirements to brace and prop prefabricated concrete elements. |
| |||||||
Element: Prepare to brace and prop prefabricated concrete elements. |
| |||||||
Element: Conduct bracing and propping of prefabricated concrete elements. |
| |||||||
Element: Review erection design documentation including task specifications and check to make sure they are in accordance with regulations and codes of practice. | ||||||||
Element: Review work health and safety (WHS) requirements for the task in accordance with safety plans and policies. | ||||||||
Element: Identify safety signage and barricade requirements. | ||||||||
Element: Review environmental requirements for the task in accordance with environmental plans and legislative requirements. | ||||||||
Element: Access plant, tools, equipment, braces props, the required material and their respective safety specifications to carry out task. | ||||||||
Element: Access set-out drawings and the erection design documentation to verify the location of prefabricated concrete installations. |
| |||||||
Element: Obtain plant, tools, equipment, check for serviceability and rectify or report any faults. | ||||||||
Element: Check braces and props for serviceability and rectify or report any faults. | ||||||||
Element: Review erection plan and access information on job sequencing, team roles and coordinated activities. | ||||||||
Element: Position levelling shims/packers to the nominated reduced level (RL) in accordance with the erection design documentation. | ||||||||
Element: Prepare and install temporary and/or permanent braces and props, incorporating modifications, correct bolt and installation procedures in accordance with the erection design documentation and standards. | ||||||||
Element: Clear all personnel from the drop zone during all lifting, handling and rotation operations. | ||||||||
Element: Check that all support fixings are all correctly installed, checked and secured in accordance with the erection design documentation, with the correct tightening torque. | ||||||||
Element: Safely access lifting points and release lifting device in accordance with the instructions provided by the lifting clutch manufacturer. |
| |||||||
Element: Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements |