- CUFGMT301A - Repair and maintain production equipment
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
CUFGMT301A Mapping and Delivery Guide
Repair and maintain production equipment
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | CUFGMT301A - Repair and maintain production equipment |
---|---|---|---|
Description | This unit describes the performance outcomes, skills and knowledge required to repair and maintain production equipment used in the screen, media and entertainment industries.In some States and Territories of Australia, a restricted electrical licence is required to repair and maintain production equipment. Restricted electrical licences allow a person to carry out electrical work incidental to a trade. Incidental work may include fault-finding on equipment or changing like for like equipment by disconnecting and reconnecting the fixed wiring. It does not include any other changes to the fixed wiring.Testing and tagging of electrical equipment must be carried out by a person with the relevant certificate of competency in accordance with the performance specifications of:Australian Standard 3760: 200 In-service safety inspection and testing of electrical equipmentAustralian Standard 3002: 1985 Electrical installations - shows and carnivalsIn some States and Territories a licensed electrician would be required to undertake the tasks outlined in element 2. | ||
Employability Skills | This unit contains employability skills. | ||
Learning Outcomes and Application | Technicians working with equipment in the screen, media and entertainment industries typically apply the skills and knowledge described in this unit. Under the supervision of a technical director or senior production staff, they are responsible for basic repairs and maintenance of equipment and facilities needed for a wide range of productions.Complex repairs requiring specific mechanical, electrical or electronic skills are referred to specialist service technicians, e.g. major electrical repairs are carried out by licensed electricians. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Construction and maintenance - general maintenance |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Undertake routine maintenance of equipment |
| |||||||
Element: Attend to the repair of production equipment |
| |||||||
Element: Review and document maintenance activity |
|
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the following is essential: ability to undertake routine repairs and maintenance on equipment used in a specified production area correct selection and use of tools application of logical fault detection procedures correct interpretation of service and technical manuals knowledge of the technical features of major types of equipment in a specified production area knowledge of OHS principles and issues in relation to the repair and maintenance of equipment in a specified production area. |
Context of and specific resources for assessment | Assessment must ensure: practical demonstration of skills within an environment with a range of operational and industry-current equipment on which the candidate can work completion of fault detection, repair and maintenance tasks within typical workplace time constraints access to a venue where repairs and maintenance can be completed access to the tools required to complete repair and maintenance tasks access to appropriate learning and assessment support when required use of culturally appropriate processes and techniques appropriate to the language and literacy capacity of learners and the work being performed. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: direct questioning combined with review of portfolios of evidence and third-party workplace reports of on-the-job performance direct observation of the candidate undertaking repair and maintenance tasks inspection of items repaired or maintained by the candidate review of repair report prepared by the candidate written or oral questioning to test knowledge of typical production equipment and OHS issues and regulations. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: CUFCAM201A Assist with a basic camera shoot CUFLGT301A Prepare, install and test lighting equipment. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
|
Required skills |
technical skills sufficient to: test for and diagnose faults in equipment undertake minor repairs on faulty equipment conduct general maintenance of equipment re-assemble equipment under repair and re-align as required tag or label equipment according to its repair status use safe electrical work practices use appropriate tools for detecting and repairing faults demonstrate good equipment storage techniques to enhance overall maintenance self-management and planning skills sufficient to work under pressure and meet deadlines literacy skills sufficient to: interpret service documentation and manuals, e.g. specifications and manufacturer instructions complete fault and maintenance reports communication skills sufficient to: work effectively as a team member liaise with technical specialists provide reports to relevant personnel on equipment status |
Required knowledge |
typical maintenance needs and schedules for the range of equipment in use cleaning agents, equipment and techniques techniques and processes for the detection of faults for specified equipment common faults and associated repair procedures for the range of equipment in use spare parts and sub-assemblies used in either sound, lighting or vision equipment repair and maintenance effects of not operating and maintaining equipment in optimal conditions, e.g.effect of bad ventilation on equipment meaning and use of electrical measurements, including voltage, current resistance, insulation and power sources (AC/DC) legal and licensing issues that impact on the repair and maintenance of equipment, including the role of the restricted electrical licence, testing and tagging certification, and limitations on the type of work that can be undertaken without a licence sources of products, supplies and equipment affect of technology on production equipment duty of care to colleagues and general public OHS and public safety legislation and regulations as they apply to technical maintenance activities |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Maintenance of equipment may include: | camera and sound equipment, including: cleaning and dusting equipment cleaning microphones and replacing inserts replacing batteries cleaning heads on recorders and playback units checking continuity of cables correct storage of equipment aligning and adjusting recording and playback units cleaning recording playback medium making back-up copies of recordings lighting equipment, including: cleaning exteriors and interiors of lanterns, bulbs, lenses, reflector assembly and lantern accessories checking cables for intact insulation, operational restraining glands and correct fitting of plug tops logging lamp hours and replacement maintaining lighting dimmers, control desks and faders: trimming top and bottom settings in analogue systems connectors continuity of cables socket outlets dimmer curve in digital dimmers checking equipment, including: focus knobs and mechanisms Par Lamps colour runners locking knobs and clamping mechanisms shutters and barn doors safety chains lamp bases lamp alignment light leakage continuity and polarity of power and data cables maintaining control desks, including: cleaning surface of control desk and peripherals cleaning faders and push-button switches checking that all connectors are in good order checking operation of desk and peripherals modifying operator position checking and cleaning disk drive and back-up system where a person has a restricted electrical licence, maintenance may include checking: that jug plugs or other connectors are in good working order that internal wiring is correctly connected and in good condition continuity of earth continuity of circuit from plug top to lamp that there is no connection between earth and either neutral or active wires vision systems, including: dusting and cleaning exteriors and interiors of all types of vision systems cleaning lenses cleaning microphones and replacing inserts cleaning heads on recorders and playback units checking cords and cables are in good condition with insulation intact checking locking and clamping mechanisms are in good order testing and replacing batteries aligning and adjusting playback equipment checking and replacing globes checking control units, focus and slide trays checking and cleaning screens replacing consumable or readily exchangeable parts, e.g. globes, batteries, gels, filters, screens and lenses checking and storing audiovisual materials and copying materials preparing back-up copies of materials. |
Accessories may include: | camera mounts batteries and battery packs lighting accessories, e.g.: focus knobs and mechanisms suspension bolts and brackets shutters and barn doors safety chains lamp bases lamp alignment sound accessories, e.g.: microphone leads windsocks brackets and stands connectors fuses spare faders headphones vision system accessories, e.g.: truss rostrums and lecterns curtaining masking trolleys stands mounting brackets chains and other rigging (within scope of licensing requirements) camera pedestals camera controls, e.g. hot head. |
Organisational procedures may include: | documenting repair and maintenance activities providing back-up materials updating contact lists for repair specialists and suppliers writing and attaching labels to faulty equipment. |
Spares and consumables may include: | batteries cables connectors disks, e.g. DVD and CD filters fuses gels globes head cleaners lenses pegs and screws screens soldering iron and solder springs tapes test tapes testing equipment voltmeter. |
Equipment may include: | lighting, including: lanterns and luminaires fresnels moving lights control desk peripherals dimmers mirror balls strobe lights smoke machines fog machines accessories sound, including: microphones of all types amplifiers speakers mixing desk effects rack tape machines headphones and headsets digital recorders CD and DVD players sequencer and sampler test equipment, e.g. voltmeters and diagnostic tools two-way communication devices vision systems, including: lenses cameras and accessories control desks mixers camera control unit (CCU) monitors screens. |
Productions may include: | animations backstage monitoring documentaries events and performances feature films festivals front of house displays interactive media productions live theatre outside broadcasts short films sporting events. |
Locations may include: | attractions and theme parks auditoriums and classrooms clubs and hotels conference venues film locations outdoor venues outside broadcasts public spaces and buildings studios theatres. |
Documentation may include: | back-up materials equipment diagrams and design specifications fault reports inventories maintenance schedules manufacturer instructions operating manuals supplier information. |
Relevant personnel may include: | camera crews clients designers editors graphic artists heads of departments lighting directors photographers sound technicians and engineers staging or lighting crew suppliers technical producers and directors technical specialists vision operators. |
Minor repairs may be: | for camera and sound equipment, e.g.: replacing or tagging items that do not require electrical or electronic skills making up leads replacing connectors replacing parts of microphones and stands replacing fuses and faders for lighting equipment, e.g.: replacing faulty globes in lanterns, work lights, emergency lights, dressing-rooms and other areas of a venue replacing defective colour replacing blown fuses in dimmers replacing faulty control desk faders and push-button switches replacing faulty control desk cards or modules for vision systems, e.g.: any instance where a faulty item can be removed and replaced simply and tagged without specific electrical or electronic skills changing blown globes replacing fuses, faders, parts of microphone stands and sound equipment connectors exchanging parts of equipment, such as cables, lenses, trays, microphones, sound recording and playback equipment changing faulty control systems, mixers, patch bays, cables, remote units, speakers and projectors. |
Licensed personnel may include: | accredited equipment specialists, e.g. for telephony qualified electricians riggers. |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Clean and maintain equipment, cables and accessories according to organisational procedures | |||
Conduct safety checks on equipment according to manufacturer instructions and OHS guidelines | |||
Check and replace spares and consumables and ensure production equipment is ready and available to productions at specified locations | |||
Complete required documentation to ensure accurate records of checked and maintained items, and provide copies to relevant personnel | |||
Recognise faults and safely shut down equipment if necessary, following manufacturer instructions and organisational procedures | |||
Isolate fault to specific equipment or parts of equipment using fault detection procedures, and determine nature of repair requirements | |||
Tag faulty production equipment according to organisational procedures | |||
Make minor repairs to faulty equipment according to safety requirements and manufacturer instructions and within level of own responsibility | |||
Refer complex repairs to technical specialists or licensed personnel in consultation with relevant personnel | |||
Where appropriate, have technical specialists pilot the repair from a remote location | |||
Discuss faults and repair needs with technical specialists, demonstrating correct use of terminology | |||
Undertake simple modifications to equipment, ensuring current safety measures and deadlines are met | |||
Complete documentation according to organisational procedures and distribute to relevant personnel as required | |||
Review repair and maintenance activities to ensure compliance with legislation and organisational procedures |
Forms
Assessment Cover Sheet
CUFGMT301A - Repair and maintain production equipment
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
CUFGMT301A - Repair and maintain production equipment
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: