Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FBPSUG2018 Mapping and Delivery Guide
Undertake forming, bending and shaping

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency FBPSUG2018 - Undertake forming, bending and shaping
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to carry out forming, bending and shaping operations. It includes hot or cold forming of pipes, cylinders, cones, angles, and ductwork using presses, shapers, benders and drop hammers. The unit applies to individuals who work under supervision in the sugar milling industry.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for forming, bending and shaping to meet specifications
  • Identify forming, bending and shaping requirements according to job specifications
  • Select, fit and use personal protective equipment according to health and safety procedures in the workplace
  • Select materials according to specifications
  • Set up and adjust the equipment according to operating procedures
  • Prepare simple templates according to specifications
  • Conduct pre-operational equipment checks according to operating procedures
  • Identify and report health and safety hazards and maintenance requirements
       
Element: Operate forming, bending and shaping equipment to achieve required outcome
  • Start and operate and shut down the lathe according to operating procedures
  • Position and clamp materials accurately in the machine according to operating procedure
  • Adjust equipment to meet operating requirements
  • Ensure the work area is maintained to meet workplace cleaning standards
       
Element: Form, bend and shape material
  • Level, straighten, roll, press or bend material according to specifications
  • Form and shape material to size
  • Check final form or shape for compliance to specifications
  • Identify and correct non-conforming shapes as required
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify forming, bending and shaping requirements according to job specifications 
Select, fit and use personal protective equipment according to health and safety procedures in the workplace 
Select materials according to specifications 
Set up and adjust the equipment according to operating procedures 
Prepare simple templates according to specifications 
Conduct pre-operational equipment checks according to operating procedures 
Identify and report health and safety hazards and maintenance requirements 
Start and operate and shut down the lathe according to operating procedures 
Position and clamp materials accurately in the machine according to operating procedure 
Adjust equipment to meet operating requirements 
Ensure the work area is maintained to meet workplace cleaning standards 
Level, straighten, roll, press or bend material according to specifications 
Form and shape material to size 
Check final form or shape for compliance to specifications 
Identify and correct non-conforming shapes as required 

Forms

Assessment Cover Sheet

FBPSUG2018 - Undertake forming, bending and shaping
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

FBPSUG2018 - Undertake forming, bending and shaping

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: