Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FBPSUG3006 Mapping and Delivery Guide
Monitor a sugar mill powerhouse

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency FBPSUG3006 - Monitor a sugar mill powerhouse
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to operate and monitor one or more turbines with attached alternators supplying factory power. It applies to both continuous and short-term powerhouse operation, including start-up and shutdown after a prolonged break.The unit applies to individuals working in the sugar milling industry. The work is typically carried out in liaison with an electrician.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to operate the powerhouse
  • Select, fit and use personal protective equipment according to workplace safety procedures
  • Run warm-up sequence of turbines and alternators in preparation for handover from local powerhouse to powerhouse consul
       
Element: Monitor powerhouse operation
  • Monitor powerhouse output against site requirements
  • Monitor equipment to confirm operating condition according to workplace requirements
  • Ensure the workplace meets cleaning standards
       
Element: Analyse and respond to abnormal performance
  • Analyse plant operating data and conditions to identify causes of abnormal performance
  • Take corrective action in response to workplace hazards and abnormal plant performance
  • Implement emergency procedures according to health and safety procedures
       
Element: Hand over powerhouse operation
  • Maintain workplace records according to workplace procedures
  • Carry out handover according to workplace procedures
  • Notify powerhouse operators of powerhouse and related equipment status
       
Element: Shut down the powerhouse
  • Identify the powerhouse shut down procedure and implement
  • Prepare the powerhouse for storage in shutdown mode
  • Identify and report operational maintenance requirements according to workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Select, fit and use personal protective equipment according to workplace safety procedures 
Run warm-up sequence of turbines and alternators in preparation for handover from local powerhouse to powerhouse consul 
Monitor powerhouse output against site requirements 
Monitor equipment to confirm operating condition according to workplace requirements 
Ensure the workplace meets cleaning standards 
Analyse plant operating data and conditions to identify causes of abnormal performance 
Take corrective action in response to workplace hazards and abnormal plant performance 
Implement emergency procedures according to health and safety procedures 
Maintain workplace records according to workplace procedures 
Carry out handover according to workplace procedures 
Notify powerhouse operators of powerhouse and related equipment status 
Identify the powerhouse shut down procedure and implement 
Prepare the powerhouse for storage in shutdown mode 
Identify and report operational maintenance requirements according to workplace procedures 

Forms

Assessment Cover Sheet

FBPSUG3006 - Monitor a sugar mill powerhouse
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

FBPSUG3006 - Monitor a sugar mill powerhouse

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: