Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

FBPSUG3007 Mapping and Delivery Guide
Perform factory control tests

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency FBPSUG3007 - Perform factory control tests
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to perform tests for factory control. These tests are typically complex and/or non-routine and require interpretation of results within broad guidelines.The unit applies to individuals working in the sugar industry who are required to perform factory control tests and record data in a sugar mill.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for testing
  • Identify testing requirements and methods according to workplace requirements
  • Select, fit and use personal protective equipment according to workplace procedures
  • Manage calibration of test equipment according to operating procedures
  • Prepare standard graphs according to workplace procedures
  • Prepare and label test chemicals and reagents according to workplace procedures
  • Prepare samples as required by test method
  • Conduct and record pre-test checks according to workplace procedures
       
Element: Conduct test
  • Perform test according to test method and test schedule
  • Identify and report atypical test results
  • Record and communicate test results according to recordkeeping requirements
  • Follow procedures to repeat or validate results
  • Clean, care for and store equipment according to workplace procedures
  • Dispose of waste materials according to workplace procedures
       
Element: Record test data in laboratory information system
  • Enter results into laboratory information systems according to workplace procedures
  • Correct data entry errors as required
  • Store and retrieve data in the laboratory information system according to workplace procedures
  • Produce standard and non-standard reports from laboratory information system
  • Identify testing requirements and methods according to workplace requirements
  • Select, fit and use personal protective equipment according to workplace procedures
  • Manage calibration of test equipment according to operating procedures
  • Prepare standard graphs according to workplace procedures
  • Prepare and label test chemicals and reagents according to workplace procedures
  • Prepare samples as required by test method
  • Conduct and record pre-test checks according to workplace procedures
  • Perform test according to test method and test schedule
  • Identify and report atypical test results
  • Record and communicate test results according to recordkeeping requirements
  • Follow procedures to repeat or validate results
  • Clean, care for and store equipment according to workplace procedures
  • Dispose of waste materials according to workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Identify testing requirements and methods according to workplace requirements 
Select, fit and use personal protective equipment according to workplace procedures 
Manage calibration of test equipment according to operating procedures 
Prepare standard graphs according to workplace procedures 
Prepare and label test chemicals and reagents according to workplace procedures 
Prepare samples as required by test method 
Conduct and record pre-test checks according to workplace procedures 
Perform test according to test method and test schedule 
Identify and report atypical test results 
Record and communicate test results according to recordkeeping requirements 
Follow procedures to repeat or validate results 
Clean, care for and store equipment according to workplace procedures 
Dispose of waste materials according to workplace procedures 
Enter results into laboratory information systems according to workplace procedures 
Correct data entry errors as required 
Store and retrieve data in the laboratory information system according to workplace procedures 
Produce standard and non-standard reports from laboratory information system 
Identify testing requirements and methods according to workplace requirements 
Select, fit and use personal protective equipment according to workplace procedures 
Manage calibration of test equipment according to operating procedures 
Prepare standard graphs according to workplace procedures 
Prepare and label test chemicals and reagents according to workplace procedures 
Prepare samples as required by test method 
Conduct and record pre-test checks according to workplace procedures 
Perform test according to test method and test schedule 
Identify and report atypical test results 
Record and communicate test results according to recordkeeping requirements 
Follow procedures to repeat or validate results 
Clean, care for and store equipment according to workplace procedures 
Dispose of waste materials according to workplace procedures 

Forms

Assessment Cover Sheet

FBPSUG3007 - Perform factory control tests
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

FBPSUG3007 - Perform factory control tests

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: