List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Maintain operations of delivery systems | 1.1 Delivery systems are monitored and adjusted to ensure efficient and continuous operation and avoid damage to finished product 1.2 Substrate is added to and removed from process according to job instructions |
2. Maintain coating process | 2.1 Roller condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard 2.2 Coating system and doctor blade condition (if appropriate) are monitored and adjusted to ensure quality of product meets the approved proof standard 2.3 Drying systems are monitored and adjusted to ensure quality of product meets the approved proof standard 2.4 Quality and viscosity of varnish coatings are monitored and adjusted as necessary to ensure product quality |
3. Maintain production process | 3.1 Basic or complex in-line printing/converting/binding/finishing processes are monitored and adjusted to ensure quality of product meets the approved proof standard 3.2 Production process is operated in association with fellow workers and according to company specifications and planned daily schedule 3.3 Production is maintained within work health and safety (WHS) requirements, and company and manufacturer’s specifications 3.4 Manual and/or automatic control is used as per specification 3.5 Performance is monitored and verified using the process control system according to enterprise procedures 3.6 Coating performance, register and position are monitored and adjusted throughout production run 3.7 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 3.8 Process adjustments to eliminate problems are reported according to enterprise procedures 3.9 Waste is sorted according to enterprise procedures |
4. Identify and rectify problems | 4.1 Faulty performance of equipment is identified and reported according to enterprise procedures 4.2 Problems in coating machine are identified and reported according to enterprise procedures 4.3 Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level 4.4 Coating machine operation is checked to ensure correct operation |
5. Conduct shutdown of production process | 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures 5.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements 5.3 Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures 5.4 All product is removed from operating area 5.5 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 5.6 Repair/adjustment is verified prior to resumption of operations |
6. Clean and wash up coating machine at end of print run | 6.1 Cylinders, plate and roller surfaces are cleaned ready for next run 6.2 Coating delivery system is washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements 6.3 In-line slitting units are cleaned ready for next run 6.4 Reef feed, transportation and delivery systems are disengaged and cleaned ready for next run 6.5 Production records or other documentation are accurately completed where required by enterprise procedures |
Evidence of the ability to:
complete THREE complex coating jobs (one spot coating, one overall coating and one fine detail, using three different coatings – one of which must be metallic, and include at least one in-line process) including:
producing a complex coated product on either a reel- or sheet-fed machine ensuring an efficient production flow maintaining product quality standards
anticipate and rectify production problems with minimum downtime
shutdown and clean the machine according to work health and safety (WHS) guidelines
use control, monitoring and data entry systems
find and use information relevant to the task from a variety of information sources.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
outline what to do if vital information is missing from the job ticket
outline checks to do prior to set up (availability of materials etc.)
identify major WHS concerns of:
setting up the sheet or reel transportation system
coating
For reel systems only
describe the effect:
on the print of excessive tension on the rewinding reel
if the web is not spliced correctly
outline precautions to ensure the rewound product is of consistent, acceptable quality
For sheet systems only
describe the effect of:
fanning sheets before loading into the press
anti-set off spray on finished job
explain how to set and check the double sheet detector during the print run
identify components that can be adjusted to ensure correct delivery in sheet systems
identify printed material below acceptable standard
outline what to do if the aqueous coating is smudging on the delivery section of the machine
explain the effects of :
UV lamp on the UV coating
varying temperature and volume of hot and cold air knives
using IR radiation (including choice of medium or short wave lamps) on coatings
identify the coating level to maintain in the pan
explain dangers of solvents and solutions used to clean the coating system, plates, cylinders and press
identify machine parts to be thoroughly cleaned following the coating of the job
identify components to be inspected for wear following the print run
identify records important for following or repeat prints
identify key types of information in, and the location of, machine manuals, safety and other documentation relevant to this task.