List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

connect at least three IoT devices to an IoT network.

In the course of the above, the candidate must:

check and test environmental factors affecting connectivity of devices.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

functions and features of industry standard network and platforms that support IoT devices and components

language uses required for installing IoT devices and networks

functions and uses industry standard hardware and software tools relating to installing IoT devices and networks

different environmental impacts and contexts relating to where and how IoT devices are used

IoT security considerations and their impact

testing and debugging methodologies and techniques required to test software, hardware and environmental impacts.

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Establish and confirm IoT device and network task requirements
Determine and document different environmental factors in which sensors and IoT devices will be deployed
Gather and document IoT device programming requirements according to business need
Determine and document organisational IoT security requirements
Determine remaining networking, software and installation architecture requirements
Lodge documentation according to organisational requirements
Install required networks according to technical specifications
Connect IoT devices to network according to specifications
Configure required sensors and determine operational needs aligned to specifications
Test connectivity of networks against technical specifications
Test device connectivity against specifications
Determine and document required system upgrades according to organisational requirements
Lodge documentation according to organisational requirements

Assessment Cover Sheet

ICTIOT501 - Install IoT devices and networks

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTIOT501 - Install IoT devices and networks

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: