List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

design, configure and test a security perimeter and integrated VPN solution on network devices on at least one occasion.

In the course of the above, the candidate must:

design and configure a firewall solution and network devices

conduct testing of the performance of the perimeter of security devices

document functionality performance results and the finalised process.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

industry standard emerging security issues and the requirement for security policies

industry standard security perimeter issues related to networks, including:

security technologies according to perimeter design

weaknesses of installed perimeter design

principles and techniques for designing and implementing a security perimeter, including:

software and hardware perimeter solutions

organisational network infrastructure

auditing and penetration testing techniques

logging analysis techniques.

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Identify organisational and industry standard security threats according to organisational policies and procedures
Determine required firewall security according to organisational requirements
Research and identify available perimeter security options according to organisational requirements
Design security perimeter according to organisational requirements
Deploy required perimeter devices according to network security requirements
Configure required perimeter topology according to network security requirements
Configure basic functionality of devices according to network security requirements
Configure required advanced functions according to network security requirements
Back up device configuration according to network security requirements
Design and configure perimeter and enable continuity of service during devices upgrades
Design and configure perimeter and enable continuity of service in event of device failure
Configure perimeter for site-to-site virtual private networks (VPNs)
Configure perimeter as a remote access VPN server
Configure perimeter to allow VPN tunnel forwarding
Diagnose and resolve VPN connectivity issues according to network security requirements
Test required functionality of basic features according to network security requirements
Test required functionality of advanced features according to network security requirements
Perform required penetration testing and verify perimeter against security requirements
Document functionality performance results and submit to required personnel

Assessment Cover Sheet

ICTNWK544 - Design and implement a security perimeter for ICT networks

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

ICTNWK544 - Design and implement a security perimeter for ICT networks

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: