Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

LMFPT3004A Mapping and Delivery Guide
Rebuild upright and grand piano action, keys and pedals

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency LMFPT3004A - Rebuild upright and grand piano action, keys and pedals
Description This unit describes the skills and knowledge required to rebuild upright and grand piano action, keys and pedals.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit applies to the skills and knowledge required to rebuild actions, keyboards and pedals for upright and grand pianos. The unit applies in a workplace and onsite environment and may be conducted in a small to large scale enterprise.The type of work tasks performed when carrying out rebuilding tasks on piano actions, keys and pedals may include removal and rebuilding of: keys and key leads; damaged or worn felts, leathers and action springs; and broken hammerheads.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Nil
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan for rebuilding action, keys and pedals
  • OHS requirements, legislative requirements and workplace practices relevant to rebuilding pianos are verified and complied with.
  • Customer requirements are received, analysed and confirmed with appropriate personnel.
  • Communication with others involved with the work is established and maintained to ensure efficient workflow, coordination, personnel cooperation and safety throughout the application of this competency.
  • Written instructions are followed.
       
Element: Prepare to rebuild
  • Tools and equipment are selected consistent with the needs of the job.
  • Selected tools and equipment are checked for service ability and safety and any faults repaired and reported according to workplace practices
  • Personal protective equipment is correctly fitted and used
  • Materials required for the repair of piano action, keys and pedals are selected
       
Element: Dismantle action and keys
  • Correct posture for rebuilding is demonstrated, which minimizes fatigue and promotes muscular control
  • Action is dismantled and all parts are named and numbered.
  • Keys are removed from keyboard and named and numbered.
  • Pedals are removed.
       
Element: Rebuild parts
  • Parts to be rebuilt or reconditioned are identified.
  • Parts are measured and stripped of old materials in preparation for reconditioning.
  • Parts are measured and reconfigured in preparation for rebuilding.
  • Rebuilding or reconditioning of action, key and pedals is carried out as required.
  • Quality of the rebuilding process is continuously monitored in accordance with workplace practice and quality procedures.
  • Piano action, keys and pedals are re-assembled according to workplace practices
       
Element: Clean up work area
  • All tools, materials and other equipment are checked, cleaned and returned to their appropriate location.
  • Work area is cleared and waste removed
  • Workplace documentation is completed and filed
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Interpret work order, locate materials and use information to complete tasks to rebuild upright and grand piano actions, keys and pedals

Identify tools and equipment used in rebuilding actions, keys and pedals

Select, set up and maintain equipment in accordance with manufacturer specifications and workplace practices

Rebuild a minimum of two actions, keys and pedals in both upright and grand pianos

Modify activities to cater for variations in workplace contexts and environment

Communicate and work with others in the work area

Apply safe handling practices and safe operating procedures for equipment, products and materials to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

Clean tools, equipment and work area

Maintain and repair a range of hand and power tools used in piano rebuilding

Apply OHS practices when using hand and power tools, holding and support equipment, products and materials, including use of personal protective equipment

Context of and specific resources for assessment

Assessment may occur on the job or in a simulated workplace environment in accordance with work practices and safety requirements

Assessment is to occur under standard work practices, and to comply with legislative and regulatory requirements.

The following resources should be made available:

hand and power tools used in the repair and manufacture of pianos

materials used in the repair and manufacture of pianos

safety and personal protective equipment

holding and supporting equipment

workplace location or simulated workplace

upright and grand pianos

Method of assessment

Assessment must confirm consistency (over time and in a range of workplace relevant contexts) in application of skills and knowledge when:

organising work

completing tasks according to instructions

working systematically with attention to detail

identifying improvements and avoiding damage

using workplace practices

using OHS practices

assessing operational readiness of tools and equipment

recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Assessment must include a variety of project or work activities that allow the candidate to demonstrate competency in the unit

Assessment should be by direct observation of tasks and include questioning on required knowledge and skills to ensure correct interpretation and application.

Assessment should be conducted over time and may be in conjunction with assessment of other units of competency

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

communicate ideas and information to enable confirmation of work requirements, plans and specifications, coordination of work with other workers and customer, and report of work outcomes and problems

complete standardized workplace information

work with others and in a team to rebuild pianos

use pre-checking and inspection techniques to anticipate problems and identify tools or equipment faults and take appropriate action

participate in establishing new ideas and work specifications for tuning pianos and repairing faults

plan and organize activities to avoid any backtracking, workflow interruptions, rework or wastage, including preparation and layout of the worksite and selection of tools and equipment

manage own work performance to:

follow OHS and workplace practices

plan and organize work schedules and routines

maintain required production output

assess quality of own work

locate, interpret and apply information on piano technology and the use and maintenance of hand and power tools

use workplace technology related to piano technology, including specified tools, equipment, calculators and measuring devices for piano rebuilding

Required knowledge

State or Territory OHS legislation, regulations, standards and codes of practice relevant to the full range of processes for rebuilding actions, keys and pedals on upright and grand pianos

organisational and site standards, requirements, policies and procedures for rebuilding actions, keys and pedals on upright and grand pianos

reading and interpreting workplace documents including work orders, work instructions and operator instructions

environmental protection requirements relating to the disposal of waste material

established lines of communication and protocols

terms used to describe components of an upright and grand piano

types, characteristics, uses, limitations and preparation of materials and equipment used in rebuilding actions, keys and pedals on upright and grand pianos

types of tools and equipment used to apply hardware and fixings and procedures for their safe use, operation and maintenance

characteristics of hardware and fixings and their use

problem identification and resolution

set up and operation of tools and equipment used for rebuilding actions, keys and pedals on upright and grand pianos

storage systems and labelling

procedures for the recording, reporting and maintenance of workplace records and information

appropriate mathematical procedures for estimation and measurement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements may include:

Relevant Federal, State or Territory OHS legislation, regulations, standards and codes of practice, and workplace policies and procedures including the use of personal protection equipment, hazard and risk control and manual handling.

Legislative requirements may include:

Relevant Federal, State or Territory legislation including award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, the environment, equal opportunity, anti-discrimination, industry codes of practice.

Workplace practices may include:

Site guidelines, policies and procedures relating to own role, quality assurance, procedural manuals, tool manufacturer's recommendations, ethical standards, recording and reporting, equipment use, maintenance and storage, environmental management (waste disposal, recycling, re-use).

Tools and equipment may include:

knives, guillotine, measuring equipment, centering equipment, glue brushes and sticks, glue pot

Personal protective equipment may include

Safety glasses, goggles, hearing protection, safety footwear, protective clothing, gloves, respiratory protection

Correct posture may include:

Standing or seating, according to type of piano and height of individual

Even distribution of body weight between both feet while standing, to reduce fatigue

Rest arm where available to aid control during tuning and reduce tiredness

Materials may include:

action felts and leathers, key bushings, key frame materials, springs, action components, key tops, pedal caps, pedal trap bushings, centre pins, hammer heads, bridle tapes

Rebuilding may include:

replacing the following with new components - hammer heads and assembly, wippen assembly, keys, action rails, pedals and trappings, springs, action brackets

Reconditioning may include:

repairing action components to an as new condition using existing parts with new materials

Workplace documentation may include:

Time sheets, customer cards, work orders including job sheets, cutting lists, plans, drawings and designs, tool maintenance records and schedules

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
OHS requirements, legislative requirements and workplace practices relevant to rebuilding pianos are verified and complied with. 
Customer requirements are received, analysed and confirmed with appropriate personnel. 
Communication with others involved with the work is established and maintained to ensure efficient workflow, coordination, personnel cooperation and safety throughout the application of this competency. 
Written instructions are followed. 
Tools and equipment are selected consistent with the needs of the job. 
Selected tools and equipment are checked for service ability and safety and any faults repaired and reported according to workplace practices 
Personal protective equipment is correctly fitted and used 
Materials required for the repair of piano action, keys and pedals are selected 
Correct posture for rebuilding is demonstrated, which minimizes fatigue and promotes muscular control 
Action is dismantled and all parts are named and numbered. 
Keys are removed from keyboard and named and numbered. 
Pedals are removed. 
Parts to be rebuilt or reconditioned are identified. 
Parts are measured and stripped of old materials in preparation for reconditioning. 
Parts are measured and reconfigured in preparation for rebuilding. 
Rebuilding or reconditioning of action, key and pedals is carried out as required. 
Quality of the rebuilding process is continuously monitored in accordance with workplace practice and quality procedures. 
Piano action, keys and pedals are re-assembled according to workplace practices 
All tools, materials and other equipment are checked, cleaned and returned to their appropriate location. 
Work area is cleared and waste removed 
Workplace documentation is completed and filed 

Forms

Assessment Cover Sheet

LMFPT3004A - Rebuild upright and grand piano action, keys and pedals
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

LMFPT3004A - Rebuild upright and grand piano action, keys and pedals

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: