- LMFSF2001A - Cut single layer fabrics
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
LMFSF2001A Mapping and Delivery Guide
Cut single layer fabrics
Version 1.0
Issue Date: June 2024
Qualification | - |
Unit of Competency | LMFSF2001A - Cut single layer fabrics |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Required fabrics, number of items to be cut and required equipment are identified |
| |||||||
Element: Prepare materials for cutting |
| |||||||
Element: Complete cutting operations |
|
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide identifies the critical aspects, knowledge and skills to be demonstrated to confirm competency for this unit. This is an integral part of the assessment of competency and should be read in conjunction with the Range Statement.
Critical Aspects of Evidence | Interpret work order and locate and apply relevant information Apply safe handling practices for equipment, products and materials Identify materials used and any special marking out requirements Measure accurately and cut fabric quantities to minimise waste and produce consistent quality items for at least five different types of material or product Follow work instructions, operating procedures and inspection practices to: prevent damage to goods, equipment or products maintain required production output and product quality minimise the risk of injury to self or others Work effectively with others Modify activities to cater for variations in workplace contexts and environment |
Underpinning Knowledge | Work requirements, including workplace standards Fabric types, common faults and inspection procedures Design features of the finished items in relation to attractive use of fabric patterns Cutting equipment and techniques The impact of cutting on fabrics |
Underpinning Skills | Information. Collect, organise and understand information related to work orders, basic plans and safety procedures Communication. Communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems Planning. Plan and organise activities, including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage Teamwork. Work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity Mathematical ideas and techniques. Use mathematical ideas and techniques to correctly complete measurements and estimate fabric requirements and other material requirements Solve problems. Use pre-checking and inspection techniques to anticipate cutting problems, avoid reworking and avoid wastage Use of technology. Use the limited workplace technology related to cutting, including tools, equipment, calculators and measuring devices. |
Resource Implications | Work orders, fabrics, including linings and interlinings, calculator and where available other workplace calculating and cutting equipment. |
Method of Assessment | Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts. Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency. |
Context of Assessment | Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines. |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
This unit covers the competency to measure out and cut single layer fabrics. |
ELEMENT | PERFORMANCE CRITERIA |
1 Plan work operations | Required fabrics, number of items to be cut and required equipment are identified Fabric sizes to be cut are identified from work order plus any required allowances OH&S requirements, including ergonomic criteria and personal protection needs, are observed throughout the work. Suitable work area is selected, tidied and cleaned of any contaminants Suitable scissors and or blades are selected and checked prior to use for appropriate sharpness, set, operation and safe condition Fabrics are selected in accordance with work order and laid out smooth and square |
2 Prepare materials for cutting | Fabrics are inspected for flaws and appropriate finish Naps, direction, pattern matches and face of the materials are identified Tools and equipment are checked for operation |
3 Complete cutting operations | Cutting is completed with cut out materials identified/labelled where required Any measurements for pleat lines, hems, headings and any special seam allowances are marked out using workplace approved methods Where required, fabrics are hung using appropriate protective covers and care label information is attached Cut lengths are dispatched to next process following workplace procedures Unused materials are stored as required Workplace required documentation is completed following appropriate procedures Work area is cleaned and damaged tools tagged as required Waste is collected and bundled for recycling/reuse as required |
The Range Statement provides advice to interpret the scope and context of this unit of competency, allowing for differences between enterprises and workplaces. It relates to the unit as a whole and facilitates holistic assessment. The following variables may be present for this particular unit:
Single layer fabrics | Single layer fabrics. This unit applies to soft furnishings and upholstered items cut from measurements and instructions, and does not apply to cutting from patterns |
Unit context | OH&S requirements may include legislation, building codes, material safety management systems, hazardous and dangerous goods codes and local safe operating procedures or equivalent Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements Work requires individuals to demonstrate some discretion, judgement and problem solving skills in the set up and operation of machines. This may be demonstrated either individually or in a team environment |
Workplace environment | Work may be performed in workplaces which are involved in the manufacture of soft furnishings and upholstered furniture and in the repair and restoration of furnishing products |
Tools and equipment | Tools and equipment may include, but are not limited to: cutting equipment, including scissors and cutting machines; measuring and calculating equipment, including tapes, rulers, calculators and computers |
Products | Products to be constructed may include, but are not limited to: curtains, drapes, swags, cushions and upholstered furniture components |
Personal protective equipment | Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices |
Information and procedures | Machine manufacturers’ specifications and operational procedures Workplace procedures relating to the setting and operation of machinery Work instructions, including job sheets, cutting lists, plans, drawings and designs Workplace procedures relating to reporting and communication |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Fabric sizes to be cut are identified from work order plus any required allowances | |||
OH&S requirements, including ergonomic criteria and personal protection needs, are observed throughout the work. | |||
Suitable work area is selected, tidied and cleaned of any contaminants | |||
Suitable scissors and or blades are selected and checked prior to use for appropriate sharpness, set, operation and safe condition | |||
Fabrics are selected in accordance with work order and laid out smooth and square | |||
Fabrics are inspected for flaws and appropriate finish | |||
Naps, direction, pattern matches and face of the materials are identified | |||
Tools and equipment are checked for operation | |||
Cutting is completed with cut out materials identified/labelled where required | |||
Any measurements for pleat lines, hems, headings and any special seam allowances are marked out using workplace approved methods | |||
Where required, fabrics are hung using appropriate protective covers and care label information is attached | |||
Cut lengths are dispatched to next process following workplace procedures | |||
Unused materials are stored as required | |||
Workplace required documentation is completed following appropriate procedures | |||
Work area is cleaned and damaged tools tagged as required | |||
Waste is collected and bundled for recycling/reuse as required |
Forms
Assessment Cover Sheet
LMFSF2001A - Cut single layer fabrics
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
LMFSF2001A - Cut single layer fabrics
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: