Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of: associated systems, including: air start control systems cooling system cooling water system and components dual fuel systems exhaust systems fuel system, including pumps and injectors lubricating oil systems and components lubrication systems characteristics of marine internal combustion engines and associated systems, including operational limits control systems crankcase explosions and appropriate preventative and remedial action and solutions dangers associated with operating shipboard marine internal combustion engines and associated systems, and related hazard prevention strategies emergency procedures, including: explosion failure or major fault in propulsion engines and associated control systems fire loss of: bridge control electrical supply major breakdowns propulsion power steering engine protection arrangements methods for controlling and managing the operation of shipboard marine internal combustion engines and associated systems pollution control measures under relevant local, state, territory and commonwealth legislation problems associated with marine internal combustion engines and associated systems, and appropriate preventative and remedial actions and solutions procedures for monitoring and evaluating performance of marine internal combustion engines and associated systems relevant sections of state and territory maritime regulations and the National Standard for Commercial Vessels (NSCV) relevant work health and safety (WHS)/occupational health and safety (OHS)/occupational safety and health (OSH) legislation and policies requirements for emission control from internal combustion engines under the International Convention for the Prevention of Pollution from Ships (MARPOL) sequence of required action when there is a major fault on main propulsion engine surroundings and changes to these surroundings technological changes in engine and control system designs turbocharging systems. |