Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEAARM0005 Mapping and Delivery Guide
Inspect, test and troubleshoot aircraft stores suspension systems and components

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEAARM0005 - Inspect, test and troubleshoot aircraft stores suspension systems and components
Description
Employability Skills
Learning Outcomes and Application
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to inspect, test and troubleshoot aircraft SSS and components
  • Verify required task from documentation
  • Visually and physically check aircraft safety devices in accordance with technical publications and manuals
  • Visually identify correct SSS component for inspection, testing and troubleshooting from documentation
  • Select appropriate tools and ground support equipment in accordance with task
  • Visually and physically check and remove fitted firing devices in accordance with maintenance manual
  • Inspect SSS component in accordance with technical publications and manuals while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
  • Prepare aircraft for testing and troubleshooting of SSS component in accordance with technical publications and manuals
       
Element: Test and troubleshoot SSS component
  • Perform functional testing of SSS component for evidence of serviceability or malfunction in accordance with technical publications and manuals
  • Identify SSS component faults in accordance with technical publications and manuals
  • Obtain required specialist advice to assist with the troubleshooting process
  • Take corrective action (repair or replace) in accordance with technical publications and manuals while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
       
Element: Complete and process documentation
  • Complete required documentation for SSS component inspection, testing and troubleshooting in accordance with standard enterprise procedures
  • Forward completed documentation to Maintenance Control Section (MCS) in accordance with standard enterprise procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Verify required task from documentation 
Visually and physically check aircraft safety devices in accordance with technical publications and manuals 
Visually identify correct SSS component for inspection, testing and troubleshooting from documentation 
Select appropriate tools and ground support equipment in accordance with task 
Visually and physically check and remove fitted firing devices in accordance with maintenance manual 
Inspect SSS component in accordance with technical publications and manuals while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE) 
Prepare aircraft for testing and troubleshooting of SSS component in accordance with technical publications and manuals 
Perform functional testing of SSS component for evidence of serviceability or malfunction in accordance with technical publications and manuals 
Identify SSS component faults in accordance with technical publications and manuals 
Obtain required specialist advice to assist with the troubleshooting process 
Take corrective action (repair or replace) in accordance with technical publications and manuals while observing all relevant WHS requirements, including the use of MSDSs and items of PPE 
Complete required documentation for SSS component inspection, testing and troubleshooting in accordance with standard enterprise procedures 
Forward completed documentation to Maintenance Control Section (MCS) in accordance with standard enterprise procedures 

Forms

Assessment Cover Sheet

MEAARM0005 - Inspect, test and troubleshoot aircraft stores suspension systems and components
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MEAARM0005 - Inspect, test and troubleshoot aircraft stores suspension systems and components

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: