List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Use relevant maintenance documentation to identify specific inspection requirements
Undertake appropriate preparation and access to the aircraft structure to allow for proper inspection in accordance with maintenance documentation
Visually or physically check aircraft structure for signs of deformation defects or damage in accordance with maintenance documentation and approved procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
Assess damage or defects against damage or wear limits specified by structural repair manual or other approved data to determine if repair or replacement is required
Complete maintenance documentation and process in accordance with standard enterprise procedures
Employ preventative maintenance techniques to preserve the integrity of aircraft structure
Obtain required specialist or supervisory advice to assist with the troubleshooting process
Clean work area of all waste material or contaminants
Complete required maintenance documentation and process in accordance with standard enterprise procedures
Support and prepare structure in accordance with the applicable maintenance manual to ensure personnel safety and freedom from damage to aircraft or component during component removal
Carry out component removal in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE
Tag and prepare removed components for transport, where applicable and in accordance with specified procedures
Check structural and/or non-structural components to be installed to confirm correct part numbers, serviceability and modification status
Carry out component installation in accordance with the applicable maintenance manual while observing all relevant WHS requirements, including the use of MSDS and items of PPE
Remove support or safety equipment at an appropriate time to ensure personnel safety and freedom from structural damage

Assessment Cover Sheet

MEAMEC0056 - Inspect and maintain structures and related components of non-pressurised small aircraft

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEAMEC0056 - Inspect and maintain structures and related components of non-pressurised small aircraft

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: