List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Check maintenance documentation to confirm that engine or module is ready for testing
Assemble engine modules into a test engine, where required
Configure engine for testing in accordance with maintenance manual requirements and standard enterprise procedures
Install engine in test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDSs) and items of personal protective equipment (PPE)
Check fuel, oil and fluid levels
Prepare engine test stand for operation
Start engine and check operating parameters
Test and trim engine performance, where applicable, in accordance with maintenance manual requirements and standard enterprise procedures, and seek required supervisory guidance for complex testing and adjustments
Record engine operating parameters and test results in accordance with standard enterprise procedures
Remove engine from test stand in accordance with maintenance manual requirements and standard enterprise procedures while observing all relevant WHS requirements, including the use of MSDSs and items of PPE
Configure, inhibit and prepare serviceable engines or modules in accordance with maintenance manual requirements and standard enterprise procedures for transport or storage, and seek required supervisory guidance for complex testing and adjustments
Return unserviceable engines or modules to workshop in accordance with standard enterprise procedures for rectification or rework

Assessment Cover Sheet

MEAMEC0067 - Test gas turbine engines and engine modules after overhaul or repair

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEAMEC0067 - Test gas turbine engines and engine modules after overhaul or repair

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: