Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
MEM05013 Mapping and Delivery Guide
Perform manual production welding
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | MEM05013 - Perform manual production welding |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit of competency covers the skills and knowledge required to perform production welding, including spot welding, in a production environment.Guidance may be required with respect to equipment settings, choice of consumables, gas mixtures and pressures.Where automated/production welding is required to be performed unit MEM07024 Operate and monitor machine and process and unit MEM07025 Perform advanced machine and process operation, should also be selected as appropriate.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Fabrication |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Determine job requirements |
| |||||||
Element: Comply with work health and safety (WHS) requirements at all times | ||||||||
Element: Use appropriate personal protective equipment (PPE) in accordance with SOPs | ||||||||
Element: Identify job requirements from specifications, sketches, job sheets or work instructions | ||||||||
Element: Weld material using appropriate welding process |
| |||||||
Element: Align material (if required) using dedicated jigs and fixtures | ||||||||
Element: Align materials, check alignment and if required adjust alignment using dedicated jigs and fixtures | ||||||||
Element: Carry out welding to accepted workplace standards |