• MEM05023C - Weld using submerged arc welding process

Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM05023C Mapping and Delivery Guide
Weld using submerged arc welding process

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM05023C - Weld using submerged arc welding process
Description This unit covers preparing materials, selecting and setting up the welding equipment, carrying out the submerged arc welding, inspecting for and correcting defects, and maintaining weld records.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application Welds are more likely to be associated with heavy rather than with light fabrication. Welds include fillet and butt welds in all positions on a range of materials that may include carbon and stainless steel. The weld quality would meet the Australian Standard 1554 General Purpose or equivalent. The unit may satisfy the requirements of AS1796 Certificate 9.Where welds comply with one of the certificates covered by Australian Standard 1796, then Unit MEM05026C (Apply welding principles) should also be selected.Band: AUnit Weight: 4
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Path 1MEM12023A Perform engineering measurements
Competency Field Fabrication
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare materials for welding
  • Weld requirements are identified from specifications and/or drawings.
  • Material is correctly prepared using tools and techniques appropriate to the material and process.
  • Materials are assembled/aligned to specifications, where required.
       
Element: Select welding machine settings and consumables
  • Welding machine settings and consumables are identified from job requirements, welding procedures and specifications and/or technical drawings.
       
Element: Assemble and set up welding equipment
  • Welding equipment is assembled and set up safely and correctly to standard operating procedures.
  • Test runs are undertaken and verified in accordance with specifications.
       
Element: Identify distortion prevention methods
  • Distortion prevention measures are identified.
  • Action appropriate to the weld type and material is taken to minimise and rectify distortion.
       
Element: Weld joints using submerged arc by correct process
  • Pad, butt and fillet welds are deposited correctly in flat, and fillet welds in horizontal position, to specification.
  • Joints are cleaned to specifications using techniques and tools appropriate to the defect, material and process.
       
Element: Inspect welds
  • Weld joints are visually inspected against specifications.
  • Weld defects are identified.
       
Element: Correct faults
  • Remedial action is taken, where required.
  • Defects are removed with minimum loss of sound metal using techniques and tools appropriate to the defect, material and process.
       
Element: Maintain weld records as required
  • Weld records are maintained to specifications and standard operating procedures.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to prepare materials, select and set up the welding equipment, carry out the submerged arc welding, visually inspect for and correct defects, and maintain the weld records. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with welding using submerged arc welding process or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

identifying and interpreting appropriate standard e.g. Australian Standard 1554 General Purpose, American Bureau of Shipping (ABS) or equivalent

selecting and using appropriate tools and equipment

using a variety of welding machines, wire electrodes, settings and materials

identifying and rectifying weld defects

applying techniques for distortion prevention and rectification

cleaning weld

maintaining weld records

Required knowledge

Look for evidence that confirms knowledge of:

main types of fluxes and flux/wire combinations

typical applications of SAW and common materials

the application of weld metal transfer (short arc, spray, etc.)

material preparation

joint preparations

electrode classification

causes of distortion for materials within the scope of this unit

causes of defects and methods of rectification

code requirements

safe welding practices

use and application of personal protective equipment for submerged arc welding

relevant hazards and control measures related to the competency

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Weld

Fillet and butt in flat and horizontal positions

Prepared

Preparation of materials including preheating, setting up of jigs, fixtures, clamps, etc., joint preparation e.g. bevelling

Equipment

DC welding machines

Distortion prevention measures

Distortion prevention including preheating, setting up of jigs, fixtures, clamps, etc.

Defects

Porosity, slag inclusions, discontinuities, lack of penetration, undercut

Remedial action

Remedial action using thermal processes may include oxy acetylene and air arc equipment; grinding devices may also be used

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Weld requirements are identified from specifications and/or drawings. 
Material is correctly prepared using tools and techniques appropriate to the material and process. 
Materials are assembled/aligned to specifications, where required. 
Welding machine settings and consumables are identified from job requirements, welding procedures and specifications and/or technical drawings. 
Welding equipment is assembled and set up safely and correctly to standard operating procedures. 
Test runs are undertaken and verified in accordance with specifications. 
Distortion prevention measures are identified. 
Action appropriate to the weld type and material is taken to minimise and rectify distortion. 
Pad, butt and fillet welds are deposited correctly in flat, and fillet welds in horizontal position, to specification. 
Joints are cleaned to specifications using techniques and tools appropriate to the defect, material and process. 
Weld joints are visually inspected against specifications. 
Weld defects are identified. 
Remedial action is taken, where required. 
Defects are removed with minimum loss of sound metal using techniques and tools appropriate to the defect, material and process. 
Weld records are maintained to specifications and standard operating procedures. 

Forms

Assessment Cover Sheet

MEM05023C - Weld using submerged arc welding process
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM05023C - Weld using submerged arc welding process

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: