Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM05024 Mapping and Delivery Guide
Perform welding supervision

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM05024 - Perform welding supervision
Description
Employability Skills
Learning Outcomes and Application This unit of competency has been developed for post trade training of advanced engineering fabrication trades people and the recognition of post trade skills instructing and qualifying welders in accordance with weld procedures.It defines the skills and knowledge required to instruct and qualify welders in accordance with weld procedures, including maintaining quality and safety procedures.Competencies in this unit are based on wide knowledge of welding science, processes, procedures and technical requirements. Individuals working in this field would hold at least one certificate satisfying the requirements of AS 1796-2001 (R2016) Certification of welders and welding supervisors, Certificate 1-9. The supervision, training and qualification of welders in welding procedures are defined by recognised codes and standards e.g. AS 2214-2004 (R2016) Certification of welding supervisors - Structural steel welding and AS 1796-2001 (R2016) Certification of welders and welding supervisors, Certificate 10.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 12
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Fabrication
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare documents
  • Record procedure against pre-qualifying procedures
  • Record findings on internal quality assurance plan
       
Element: Determine job requirements
  • Follow standard operating procedures (SOPs)
       
Element: Comply with work health and safety (WHS) requirements at all times
       
Element: Use appropriate personal protective equipment (PPE) in accordance with SOPs
       
Element: Identify job requirements from specifications, drawings, job sheets or work instructions
       
Element: Determine and prepare welding procedure
  • Instruct welders according to SOPs
       
Element: Determine welding parameters in accordance with weld procedures
       
Element: Plan variables and sequence checks against documentation
       
Element: Prepare documentation for record keeping
       
Element: Qualify welders to required procedures
  • Train welders in relevant weld procedures
       
Element: Test welders against relevant weld procedures
       
Element: Maintain welder performance reports against weld procedures
       
Element: Monitor/ maintain quality assurance and safety procedures
  • Monitor internal quality assurance plan
       
Element: Ensure traceability of materials
       
Element: Ensure welding is supervised to compliance with prescribed specifications and/or documented procedures and/or safety procedures
  • Record procedure against pre-qualifying procedures
       
Element: Record findings on internal quality assurance plan
       
Element: Arrange for non-destructive testing and destructive testing
  • Arrange weld tests appropriate to the weld procedure
       
Element: Verify non-destructive testing/destructive testing reports against job requirements and specifications
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

No range of conditions provided for this unit.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Record procedure against pre-qualifying procedures 
Record findings on internal quality assurance plan 
Follow standard operating procedures (SOPs) 
 
 
 
Instruct welders according to SOPs 
 
 
 
Train welders in relevant weld procedures 
 
 
Monitor internal quality assurance plan 
 
Record procedure against pre-qualifying procedures 
 
Arrange weld tests appropriate to the weld procedure 
 

Forms

Assessment Cover Sheet

MEM05024 - Perform welding supervision
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM05024 - Perform welding supervision

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: