Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM18013B Mapping and Delivery Guide
Perform gland packing

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM18013B - Perform gland packing
Description This unit covers inspecting glands and gland packing, and removing and replacing or topping up gland packing.
Employability Skills This unit contains employability skills.
Learning Outcomes and Application This unit applies to, but is not limited to, packing for high or low temperatures and pressures, solids, gases, liquids.Skills that relate to maintaining simple gland top-ups in non-critical applications and routine gland maintenance are covered by Unit MEM18006C (Repair and fit engineering components).Band: AUnit Weight: 2
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Path 1MEM18001C Use hand tools MEM12023A Perform engineering measurements
Competency Field Maintenance and diagnostics
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Inspect glands and gland packing
  • Principles of gland packing are applied.
  • Stuffing box assembly and gland packing are inspected and job requirements are determined.
       
Element: Remove gland packing
  • Using appropriate engineering techniques, tools and equipment, gland is extracted or removed.
       
Element: Replace or top up gland packing
  • Correct and appropriate gland packing is selected and cut to size and shape to conform with application and/or specifications.
  • The stuffing box is filled with packing material and the gland is reassembled using standard operating procedures or manufacturers' recommended procedures.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to pack glands. Competency in this unit cannot be claimed until all prerequisites have been satisfied.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.

Context of and specific resources for assessment

This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.

This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with gland packing or other units requiring the exercise of the skills and knowledge covered by this unit.

Method of assessment

Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.

Guidance information for assessment


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

Look for evidence that confirms skills in:

checking and clarifying task-related information

inspecting glands and gland packing

removing gland packing

cutting gland packing to size and shape

replacing or topping up gland packing

reading and interpreting routine information on written job instructions, specifications and standard operating procedures. May include drawings

following oral instructions

entering routine and familiar information onto proformas and standard workplace forms

Required knowledge

Look for evidence that confirms knowledge of:

principles of gland packing

tools, techniques and equipment required to remove gland packing

various types of gland packing

reasons for selecting gland packing

methods of cutting gland packing to size and shape

reassembling procedures

hazards and control measures associated with gland packing, including housekeeping

safe work practices

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Packing material

Carbon, hemp, rubber, leather, teflon, felt, neoprene etc. that are flat, ribbon, square, round, moulded, dry and lubricated, etc.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Principles of gland packing are applied. 
Stuffing box assembly and gland packing are inspected and job requirements are determined. 
Using appropriate engineering techniques, tools and equipment, gland is extracted or removed. 
Correct and appropriate gland packing is selected and cut to size and shape to conform with application and/or specifications. 
The stuffing box is filled with packing material and the gland is reassembled using standard operating procedures or manufacturers' recommended procedures. 

Forms

Assessment Cover Sheet

MEM18013B - Perform gland packing
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

MEM18013B - Perform gland packing

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: