List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Follow standard operating procedures (SOPs)
Comply with work health and safety (WHS) requirements at all times
Use personal protective equipment (PPE) in accordance with SOPs
Identify job requirements from specifications
Plan gem setting procedure and associated materials and equipment based on job requirements
Obtain and prepare equipment for the task
Identify materials used in bezel and claw settings and their essential characteristics
Handle gem material in a manner that ensures damage is prevented
Secure the item to be set, in a manner which prevents damage to the jewellery piece during the setting process
Adjust the height of the bezel according to the depth of the gem
Cut the bearing to size by hand or with a burr and seat and secure gem in accordance with industry standards
Shape the top of the bezel wall and bright cut the inner edge as required by the shape
Conduct work in accordance with environmental considerations
Prepare claw for setting and select the height and depth of the bearing to be cut
Cut the bearing by hand or with a burr and seat the gem in accordance with industry standards
Form the claw to secure the gem in the setting, including finishing the top of the claw to a predetermined shape without damaging the gem
Remove any securing compound and clean the jewellery piece for inspection
Check jewellery piece against quality and client requirements and rectify any deficiencies
Complete documentation in accordance with workplace procedures
Clean up and maintain production environment and equipment in accordance with SOPs

Assessment Cover Sheet

MEM19047 - Set gems in claw and bezel style settings

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM19047 - Set gems in claw and bezel style settings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: