Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM25013 Mapping and Delivery Guide
Produce three-dimensional plugs/moulds

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM25013 - Produce three-dimensional plugs/moulds
Description
Employability Skills
Learning Outcomes and Application This unit of competency defines the skills and knowledge required to manufacture three-dimensional plugs and, where applicable, solid and/or split moulds constructions used in marine vessel construction.Tasks can include the use of hand and mechanical lay-up practices for plug/mould construction.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: This unit has dual status and is to be regarded as both a Specialisation Band A unit and Specialisation Band B unit for progression to C7 (AQF level IV).Unit Weight: 12
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Marine craft construction
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Construct plug
  • Select plug construction materials in accordance with job requirements and specifications
  • Select plug coating materials to meet specifications in accordance with organisational procedures
  • Select appropriate tooling and machinery
  • Mark out plug material/s in accordance with plug construction requirements
  • Carry out plug release angles/taper, flanges and rounding/concaving of corners, where applicable
  • Use appropriate tools, machines and construction practices to construct plug
       
Element: Finish plug
  • Check plug for compliance with specifications/drawing
  • Apply final finish coatings to plug to comply with specifications, where required
  • Prepare plug for mould manufacturing in accordance with specifications or procedures
       
Element: Produce mould
  • Apply tooling coat to plug in accordance with standard application procedures
  • Apply construction materials to plug in accordance with appropriate lay-up sequence and procedure
  • Apply stiffening/bracing materials in accordance with job requirements, where applicable
  • Prepare mould for production run/s, where applicable
       
Element: Determine job requirements
  • Follow standard operating procedures (SOPs)
       
Element: Comply with work health and safety (WHS) requirements at all times
       
Element: Use appropriate personal protective equipment (PPE) in accordance with SOPs
       
Element: Establish plug specifications from drawings, relevant documentation and client discussion, as appropriate
  • Select plug construction materials in accordance with job requirements and specifications
       
Element: Select plug coating materials to meet specifications in accordance with organisational procedures
       
Element: Select appropriate tooling and machinery
       
Element: Mark out plug material/s in accordance with plug construction requirements
       
Element: Carry out plug release angles/taper, flanges and rounding/concaving of corners, where applicable
       
Element: Use appropriate tools, machines and construction practices to construct plug
  • Check plug for compliance with specifications/drawing
       
Element: Apply final finish coatings to plug to comply with specifications, where required
       
Element: Prepare plug for mould manufacturing in accordance with specifications or procedures
       
Element: Determine mould requirements
  • Interpret mould construction specifications and drawings
       
Element: Select mould construction materials in accordance with specifications
       
Element: Select appropriate tools and machinery/equipment for job application
  • Apply tooling coat to plug in accordance with standard application procedures
       
Element: Apply construction materials to plug in accordance with appropriate lay-up sequence and procedure
       
Element: Apply stiffening/bracing materials in accordance with job requirements, where applicable
       
Element: Prepare mould for production run/s, where applicable
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Materials include one (1) or more of the following:

timber

metal

plastic fibreglass

composites

fillers

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Select plug construction materials in accordance with job requirements and specifications 
Select plug coating materials to meet specifications in accordance with organisational procedures 
Select appropriate tooling and machinery 
Mark out plug material/s in accordance with plug construction requirements 
Carry out plug release angles/taper, flanges and rounding/concaving of corners, where applicable 
Use appropriate tools, machines and construction practices to construct plug 
Check plug for compliance with specifications/drawing 
Apply final finish coatings to plug to comply with specifications, where required 
Prepare plug for mould manufacturing in accordance with specifications or procedures 
Apply tooling coat to plug in accordance with standard application procedures 
Apply construction materials to plug in accordance with appropriate lay-up sequence and procedure 
Apply stiffening/bracing materials in accordance with job requirements, where applicable 
Prepare mould for production run/s, where applicable 
Follow standard operating procedures (SOPs) 
 
 
Select plug construction materials in accordance with job requirements and specifications 
 
 
 
 
Check plug for compliance with specifications/drawing 
 
 
Interpret mould construction specifications and drawings 
 
Apply tooling coat to plug in accordance with standard application procedures 
 
 
 

Forms

Assessment Cover Sheet

MEM25013 - Produce three-dimensional plugs/moulds
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM25013 - Produce three-dimensional plugs/moulds

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: