Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MEM27018 Mapping and Delivery Guide
Test, diagnose and rectify mobile and stationary plant external monitoring and control systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MEM27018 - Test, diagnose and rectify mobile and stationary plant external monitoring and control systems
Description
Employability Skills
Learning Outcomes and Application This unit of competency defines the skills and knowledge required to test, diagnose and rectify the systems used on stationary and mobile plant for functions that require communication to and from an external source. It covers installation, service and maintenance, diagnostics and troubleshooting of the on-board components of the communication, reporting and control systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 4
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Fixed and Mobile Plant
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Determine job requirements
  • Follow standard operating procedures (SOPs)
       
Element: Comply with work health and safety (WHS) requirements at all times
       
Element: Use appropriate personal protective equipment (PPE) in accordance with SOPs
       
Element: Identify job requirements from specifications, drawings, job sheets or work instructions
       
Element: Locate and identify features and purpose of external communication systems
  • Determine on-board methods of communication and data exchange with external source
       
Element: Locate on-board electronic control module (ECMs) associated with external monitoring and control systems
       
Element: Identify other external monitoring and control system hardware and components
       
Element: Test external monitoring and control system
  • Ensure equipment is parked with engine off or in specified safe mode for testing
       
Element: Check for damage to externally located antennae, sensors and other system components
       
Element: Review previous records
       
Element: Identify location of service ports and other test locations and connect laptop or test equipment
       
Element: Run specified test procedure or program to access data on system and plant performance
       
Element: Identify faults and determine if related to on-board component or ECM fault
       
Element: Analyse information from tests and test equipment and identify faults
       
Element: Trace on-board faults to root cause
       
Element: Report off-board faults in system according to SOP’s
       
Element: Rectify on-board faults
  • Repair or rectify faulty system components
       
Element: Adjust program settings to workplace and manufacturer specifications for program related faults
       
Element: Report continued program faults according to workplace procedures
       
Element: Adjust, recalibrate or replace faulty sensors, aerials and antennae
       
Element: Re-test system and document work
  • Re-test equipment external monitoring and control system to ensure compliance with specifications and workplace needs
       
Element: Undertake any required final adjustments
       
Element: Document work undertaken in accordance with procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

The systems and equipment covered by this unit are found in stationary and mobile plant used in one or more of the following:

mining

agriculture

forestry

construction

transport industries

External monitoring and control systems include one (1) or more of the following:

integrated original equipment manufacturer (OEM) management and monitoring systems

bolt on systems

remote control and guidance systems, including on and off site remote control systems

single equipment system telemetry and monitoring systems

multi-mode systems allowing choice of operator control, semi-autonomous and fully autonomous control

load and yield management and monitoring

equipment condition monitoring and reporting systems

safety related systems, including proximity awareness and collision avoidance systems

Communication and data exchange method includes one or more of the following:

satellite

Wi-Fi

cellular

radio

global positioning system (GPS)

laser

Hardware and components include one (1) or more of the following

on-board electronic control modules (ECMs)

connectors

memory and communication interfaces

ethernet connectors

broadband transmitter/receiver (could be built into other hardware e.g. a PC)

radio frequency (RF) transmitter/receiver

laser transmitter/receiver

GPS receiver

satellite dish/aerial

displays, buzzers and signal lamps

operator switches and controls

antennae

fieldbus cables and connectors to other on-board systems and ECMs

sensors

radar

cameras

service ports

power input

service ports to allow for laptops and other test instrumentation to be connected (e.g. USB, serial and connecting cables)

External communication systems can be related to single equipment system which include one (1) or more of the following:

engine

tyres

load monitoring and reporting

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Follow standard operating procedures (SOPs) 
 
 
 
Determine on-board methods of communication and data exchange with external source 
 
 
Ensure equipment is parked with engine off or in specified safe mode for testing 
 
 
 
 
 
 
 
 
Repair or rectify faulty system components 
 
 
 
Re-test equipment external monitoring and control system to ensure compliance with specifications and workplace needs 
 
 

Forms

Assessment Cover Sheet

MEM27018 - Test, diagnose and rectify mobile and stationary plant external monitoring and control systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MEM27018 - Test, diagnose and rectify mobile and stationary plant external monitoring and control systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: