Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFFL2014 Mapping and Delivery Guide
Select, operate and maintain scarifying equipment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFFL2014 - Select, operate and maintain scarifying equipment
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers using scarifying equipment in applications relating to floor preparation.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to access to scarifying equipment and attachments, manufacturer/user instructions and/or manuals and a realistic scarifying task.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Identify scarifying equipment
  • Applicable work health and safety (WHS), legislative and organisational requirements relevant to the use of scarifying equipment are verified and complied with
  • Types of scarifying equipment and their functions are identified from relevant information sources
  • Instructions and/or plans are read and interpreted to identify the process required to complete work tasks
  • Sources of power supply are recognised
       
Element: Select scarifying equipment
  • Scarifying equipment and shot size are selected consistent with the needs of the job
  • Scarifying equipment is checked for serviceability and safety and any faults are correct or processed for repair
       
Element: Clean and prepare sub-floor
  • Appropriate personal protective equipment is selected, correctly fitted and used
  • Fittings and fixtures are removed from the sub-floor
  • Sub-floor is cleared of loose debris and dirt, and cleaned
       
Element: Scarify the floor
  • Work sequence and starting point are selected
  • Perimeter is prepared using an angle grinder
  • Main area is scarified using the most appropriate available equipment in accordance with Australian Standards or subsequent replacement standards
  • Floor area is cleaned, inspected and re-worked as required
       
Element: Complete housekeeping
  • Tools and equipment are cleaned and stored appropriately
  • Work area is cleaned and rubbish disposed of appropriately
  • Workplace documentation is completed
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify scarifying equipment

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to the use of scarifying equipment are verified and complied with

1.2

Types of scarifying equipment and their functions are identified from relevant information sources

1.3

Instructions and/or plans are read and interpreted to identify the process required to complete work tasks

1.4

Sources of power supply are recognised

2

Select scarifying equipment

2.1

Scarifying equipment and shot size are selected consistent with the needs of the job

2.2

Scarifying equipment is checked for serviceability and safety and any faults are correct or processed for repair

3

Clean and prepare sub-floor

3.1

Appropriate personal protective equipment is selected, correctly fitted and used

3.2

Fittings and fixtures are removed from the sub-floor

3.3

Sub-floor is cleared of loose debris and dirt, and cleaned

4

Scarify the floor

4.1

Work sequence and starting point are selected

4.2

Perimeter is prepared using an angle grinder

4.3

Main area is scarified using the most appropriate available equipment in accordance with Australian Standards or subsequent replacement standards

4.4

Floor area is cleaned, inspected and re-worked as required

5

Complete housekeeping

5.1

Tools and equipment are cleaned and stored appropriately

5.2

Work area is cleaned and rubbish disposed of appropriately

5.3

Workplace documentation is completed

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Scarify a concrete sub-floor of a minimum of 10 sq. m to industry standards

Complete operator maintenance on scarifying equipment

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

State or territory WHS legislation, regulations, standards and codes of practice relevant to the use of scarifying equipment

Organisational and site standards, requirements, policies and procedures for preparing and presenting design information for the use of scarifying equipment

Types of scarifier attachments, their uses, capabilities and maintenance requirements

Characteristics, uses and limitations of the available shot sizes

Environmental protection requirements

Established communication channels and protocols

Relevant problem identification and resolution

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Identify scarifying equipment

1.1

Applicable work health and safety (WHS), legislative and organisational requirements relevant to the use of scarifying equipment are verified and complied with

1.2

Types of scarifying equipment and their functions are identified from relevant information sources

1.3

Instructions and/or plans are read and interpreted to identify the process required to complete work tasks

1.4

Sources of power supply are recognised

2

Select scarifying equipment

2.1

Scarifying equipment and shot size are selected consistent with the needs of the job

2.2

Scarifying equipment is checked for serviceability and safety and any faults are correct or processed for repair

3

Clean and prepare sub-floor

3.1

Appropriate personal protective equipment is selected, correctly fitted and used

3.2

Fittings and fixtures are removed from the sub-floor

3.3

Sub-floor is cleared of loose debris and dirt, and cleaned

4

Scarify the floor

4.1

Work sequence and starting point are selected

4.2

Perimeter is prepared using an angle grinder

4.3

Main area is scarified using the most appropriate available equipment in accordance with Australian Standards or subsequent replacement standards

4.4

Floor area is cleaned, inspected and re-worked as required

5

Complete housekeeping

5.1

Tools and equipment are cleaned and stored appropriately

5.2

Work area is cleaned and rubbish disposed of appropriately

5.3

Workplace documentation is completed

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individual to demonstrate some discretion, judgement and problem solving

Australian Standards include:

AS/NZS 2455.1:2007 Textile floor coverings - Installation practice - General

AS 1884-2012 Floor coverings - Resilient sheet and tiles - Installation practices

Sources of power supply include:

electric

gas

petrol

Attachments include:

cutting heads

vacuum systems

Fault reporting includes:

verbal or written reporting

Fittings and fixtures include:

nails

door stops

gripper strips

metal mouldings

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Applicable work health and safety (WHS), legislative and organisational requirements relevant to the use of scarifying equipment are verified and complied with 
Types of scarifying equipment and their functions are identified from relevant information sources 
Instructions and/or plans are read and interpreted to identify the process required to complete work tasks 
Sources of power supply are recognised 
Scarifying equipment and shot size are selected consistent with the needs of the job 
Scarifying equipment is checked for serviceability and safety and any faults are correct or processed for repair 
Appropriate personal protective equipment is selected, correctly fitted and used 
Fittings and fixtures are removed from the sub-floor 
Sub-floor is cleared of loose debris and dirt, and cleaned 
Work sequence and starting point are selected 
Perimeter is prepared using an angle grinder 
Main area is scarified using the most appropriate available equipment in accordance with Australian Standards or subsequent replacement standards 
Floor area is cleaned, inspected and re-worked as required 
Tools and equipment are cleaned and stored appropriately 
Work area is cleaned and rubbish disposed of appropriately 
Workplace documentation is completed 

Forms

Assessment Cover Sheet

MSFFL2014 - Select, operate and maintain scarifying equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFFL2014 - Select, operate and maintain scarifying equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: