List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Interpret concrete polishing requirements from job instructions
Identify hazards and check risk treatments are in place and operating
Select and check concrete grinding, polishing and other required equipment and tools are ready to use, and organise to fix any deficiencies according to workplace procedures
Gather cleaning chemicals, preparation and finishing products and other materials required by job instructions, and check they meet quality requirements and are ready to use according to the manufacturer instructions, product labels, safety data sheets and workplace procedures
Remove fittings, fixtures, loose debris, dirt, adhesives, paint and other items and contaminants from the floor using appropriate methods and products
Measure and mix cleaning chemicals, if required, in the correct ratios according to the manufacturer instructions, product labels and safety data sheets
Set up the polishing machine with the machine rotation speed, direction and diamond tools appropriate for removing contaminants
Operate the polishing machine to capture and remove contaminants according to job instructions
Operate the polishing machine to establish a passing pattern, and polish the concrete floor according to workplace procedures and job instructions
Overlap outer zones and stagger passes to achieve the desired finish
Continually monitor the machine to ensure its motors are running within the manufacturer safe operating limits and there are no apparent electrical faults
Polish the floor’s perimeter using edge and corner polishing equipment and appropriate attachments
Identify excessive wear on the polishing machine and accessories during the polishing process and change the tools or fix any deficiencies according to workplace procedures
Buff the floor using buffing pads
Check the floor is polished correctly according to job instructions and quality requirements, and fix any deficiencies
Clean up the work area, identify items for recycling and dispose of waste
Identify, tag and report any damage to equipment and tools
Check, clean and do routine maintenance on equipment and tools and store them and unused materials
Complete task outcome documentation

Assessment Cover Sheet

MSFFL3108 - Polish concrete floors

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFFL3108 - Polish concrete floors

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: