List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Interpret vinyl sheet flooring installation requirements from job and manufacturer instructions and calculate the quantities of materials required
Identify hazards relating to the work site, work practices, materials, tools and equipment, and check risk treatments are in place and operating
Select and check all required tools and equipment are ready to use, and organise to fix any deficiencies according to workplace procedures
Gather the vinyl sheet flooring, adhesives and finishing, joining and other materials required by job instructions, and check they meet quality requirements and are prepared and ready to use or install according to the manufacturer instructions, product labels, safety data sheets and workplace procedures
Confirm the subfloor is clean and suitable for installing the vinyl sheet flooring, and fix or report any deficiencies according to workplace procedures
Establish the starting point and mark out working lines
Cut and fasten any required pre-form fillet according to job instructions
Lay out the vinyl sheets and check them for size, direction of grain, and sheet and pattern match
Measure, mark and cut the vinyl sheets as required
Fold back the vinyl sheet flooring and apply adhesive to the subfloor according to the manufacturer instructions, product labels, safety data sheets and workplace procedures
Position and fasten the vinyl sheet flooring into adhesive according to workplace procedures
Weld vinyl sheets’ seams and joins according to the manufacturer instructions
Finish installing the vinyl sheet flooring and install skirting, reducer and edge strips to meet quality requirements
Check the vinyl sheet flooring is installed correctly according to job instructions and quality requirements, and fix any deficiencies
Clean up the work area, identify items for recycling and dispose of waste
Identify, tag and report any damage to equipment and tools
Check, clean and do routine maintenance on equipment and tools and store them and unused materials
Complete task outcome documentation

Assessment Cover Sheet

MSFFL3115 - Install commercial sheet vinyl flooring

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFFL3115 - Install commercial sheet vinyl flooring

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: