List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Determine task requirements through review of documentation and inspection of windows and doors to be installed
Select laser levelling equipment suitable for the installation and set up to manufacturer recommendations
Plan levelling in detail including sequencing, and prioritise tasks and system requirements
Identify and mitigate potential site hazards for personnel and property and/or select control measures in accordance with the work plan
Take accurate measurements using laser levelling devices, and correctly interpret and record in accordance with standard operating procedures
Locate or set up datum point from measurements
Take readings to datum and at nominated or selected stations, to project specifications
Make levelling realignment calculations using correct and appropriate methods for the installation levelling and/or alignment application
Level and align glass window and door components to specifications using correct and appropriate techniques, and make adjustments to ensure compliance with manufacturer specifications and the work plan
Temporarily fix glass components in the assigned installation positions prior to final measurement
Undertake final level and alignment inspections, make any adjustments and fix glass components to the building using appropriate fasteners
Close down levelling equipment and notify appropriate personnel of completed installation in accordance with workplace requirements
Clear, clean, restore and secure work area of waste, in accordance with site and/or workplace procedures
Maintain plant, tools and equipment and store in accordance with site and/or workplace procedures
Finalise and document completion details in accordance with workplace procedures

Assessment Cover Sheet

MSFGG4012 - Perform laser measurement and levelling for glass windows and doors in buildings

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFGG4012 - Perform laser measurement and levelling for glass windows and doors in buildings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: