Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFPF2003 Mapping and Delivery Guide
Join mouldings

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFPF2003 - Join mouldings
Description
Employability Skills
Learning Outcomes and Application This unit of competency covers joining mouldings to form artwork frames.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must:

hold training and assessment competencies as determined by the National Skills Standards Council (NSSC) or its successors

have vocational competency in the furnishing industry at least to the level being assessed with broad industry knowledge and experience, usually combined with a relevant industry qualification

be familiar with the current skills and knowledge used and have relevant, current experience in the furnishing industry.

Assessment methods must confirm consistency of performance over time rather than a single assessment event and in a range of workplace relevant contexts.

Assessment must be by observation of relevant tasks with questioning on underpinning knowledge and, where applicable, multimedia evidence, supervisor’s reports, projects and work samples.

Assessment is to be conducted on single units of competency or in conjunction with other related units of competency. Foundation skills are integral to competent performance in the unit and should not be assessed separately.

Assessment must occur on the job or in a workplace simulated facility with relevant process, equipment, materials, work instructions and deadlines.

Access is required to timber, metal or synthetic mouldings, frame components, consumables and workplace procedures.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Patterns, work instructions and/or plans are read and interpreted
  • Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work
  • The process for obtaining materials/components and moving completed work to the next process is identified
  • Required components, attachments, tools and equipment are identified
  • Work sequence is planned to suit the job
       
Element: Prepare for frame assembly
  • Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile
  • Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined
  • Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • Shortages/defective items are notified in accordance with workplace practices
       
Element: Assemble frame
  • Components are laid out and joined using a jig (if required) and appropriate fastenings
  • Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements
  • Corners are finished in accordance with workplace requirements
  • Joined frames are stored according to workplace requirements
       
Element: Complete work
  • Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal
  • Tools, equipment and unused materials are cleaned and stored following workplace procedures
  • Equipment faults are identified, tagged and reported to appropriate personnel
  • Work area is cleaned and rubbish disposed of as appropriate
  • Workplace documentation is completed as required
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Patterns, work instructions and/or plans are read and interpreted

1.2

Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work

1.3

The process for obtaining materials/components and moving completed work to the next process is identified

1.4

Required components, attachments, tools and equipment are identified

1.5

Work sequence is planned to suit the job

2

Prepare for frame assembly

2.1

Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile

2.2

Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined

2.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.4

Shortages/defective items are notified in accordance with workplace practices

3

Assemble frame

3.1

Components are laid out and joined using a jig (if required) and appropriate fastenings

3.2

Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements

3.3

Corners are finished in accordance with workplace requirements

3.4

Joined frames are stored according to workplace requirements

4

Complete work

4.1

Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal

4.2

Tools, equipment and unused materials are cleaned and stored following workplace procedures

4.3

Equipment faults are identified, tagged and reported to appropriate personnel

4.4

Work area is cleaned and rubbish disposed of as appropriate

4.5

Workplace documentation is completed as required

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Join each of the following frames (at least one of them being a multi-angle frame) up to a width of 100 mm:

synthetic

timber

aluminium

and each in the following profiles:

flat

traditional

reverse

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Avoid backtracking, work flow interruptions or wastage

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

Type, characteristics, uses and limitations of moulding materials

Workplace safety system requirements related to joining picture frame mouldings

Work flow in relation to frame production

Operation of tools and equipment used in the assembly process

Identification of equipment, processes and procedures

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for work

1.1

Patterns, work instructions and/or plans are read and interpreted

1.2

Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work

1.3

The process for obtaining materials/components and moving completed work to the next process is identified

1.4

Required components, attachments, tools and equipment are identified

1.5

Work sequence is planned to suit the job

2

Prepare for frame assembly

2.1

Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile

2.2

Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined

2.3

Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.4

Shortages/defective items are notified in accordance with workplace practices

3

Assemble frame

3.1

Components are laid out and joined using a jig (if required) and appropriate fastenings

3.2

Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements

3.3

Corners are finished in accordance with workplace requirements

3.4

Joined frames are stored according to workplace requirements

4

Complete work

4.1

Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal

4.2

Tools, equipment and unused materials are cleaned and stored following workplace procedures

4.3

Equipment faults are identified, tagged and reported to appropriate personnel

4.4

Work area is cleaned and rubbish disposed of as appropriate

4.5

Workplace documentation is completed as required

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit context includes:

WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent

work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

work requires individuals to demonstrate some discretion, judgement and problem solving

Patterns and work instructions include:

the size of the frames

types of attachments to be used

required materials and tools

quality requirements for the frames

the assembly steps and sequence

Tools and equipment include:

underpinners (pneumatic or power V-nailer)

V-nails

drill

nail punch

screwdrivers

touch-up material

glues and finishing tools

files

sandpaper

jigs

Moulding materials include:

solid timber

composites

metal and alloy extrusion

synthetics

filler

putties

touch-up pens

paints/stains

Personal protective equipment includes:

that prescribed under legislation, regulations and enterprise policies:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Information and procedures include:

workplace procedures relating to the use of tools and equipment

work instructions, including job sheets, cutting lists, plans, drawings and designs

workplace procedures relating to reporting and communication

manufacturer specifications and operational procedures

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Patterns, work instructions and/or plans are read and interpreted 
Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work 
The process for obtaining materials/components and moving completed work to the next process is identified 
Required components, attachments, tools and equipment are identified 
Work sequence is planned to suit the job 
Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile 
Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined 
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety 
Shortages/defective items are notified in accordance with workplace practices 
Components are laid out and joined using a jig (if required) and appropriate fastenings 
Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements 
Corners are finished in accordance with workplace requirements 
Joined frames are stored according to workplace requirements 
Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal 
Tools, equipment and unused materials are cleaned and stored following workplace procedures 
Equipment faults are identified, tagged and reported to appropriate personnel 
Work area is cleaned and rubbish disposed of as appropriate 
Workplace documentation is completed as required 

Forms

Assessment Cover Sheet

MSFPF2003 - Join mouldings
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFPF2003 - Join mouldings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: