Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

MSFPF2010 Mapping and Delivery Guide
Join mouldings

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency MSFPF2010 - Join mouldings
Description
Employability Skills
Learning Outcomes and Application This unit describes the skills and knowledge required to join mouldings to form artwork frames. Frames may be for artworks, documents, textiles or three dimensional (3D) items.This unit applies to picture framers and others completing work in accordance with pre-determined frame designs. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Picture framing
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for work
  • Read work order and identify joining requirements
  • Identify and follow work health safety requirements throughout the work
  • Obtain and check frame components against work instructions for size, number, pattern and finish profile
  • Identify and report shortages and defective items in accordance with workplace practice
  • Select fixing and joining devices in accordance with work instructions and type of moulding to be joined
  • Select and check tools and equipment for suitability, quality, serviceability and safety prior to use
  • Plan the work sequence to suit the job
       
Element: Assemble frames
  • Lay out components and join using selected equipment, fastenings and appropriate adhesives
  • Check assembled frame for alignment, required pattern matching and correct fasteners and attachments
  • Finish corners in accordance with workplace requirements
  • Inspect completed frames for compliance with quality and work order requirements, and rectify any deficiencies
  • Store joined frames in accordance with workplace requirements
       
Element: Complete work
  • Mark completed work for identification and store in accordance with workplace procedures
  • Identify and store items for recycling in accordance with workplace procedures
  • Clean work area and safely dispose of rubbish
  • Accurately complete required workplace documentation
  • Check, clean and store tools and equipment in accordance with workplace procedures
  • Read work order and identify joining requirements
  • Identify and follow work health safety requirements throughout the work
  • Obtain and check frame components against work instructions for size, number, pattern and finish profile
  • Identify and report shortages and defective items in accordance with workplace practice
  • Select fixing and joining devices in accordance with work instructions and type of moulding to be joined
  • Select and check tools and equipment for suitability, quality, serviceability and safety prior to use
  • Plan the work sequence to suit the job
  • Lay out components and join using selected equipment, fastenings and appropriate adhesives
  • Check assembled frame for alignment, required pattern matching and correct fasteners and attachments
  • Finish corners in accordance with workplace requirements
  • Inspect completed frames for compliance with quality and work order requirements, and rectify any deficiencies
  • Store joined frames in accordance with workplace requirements
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Read work order and identify joining requirements 
Identify and follow work health safety requirements throughout the work 
Obtain and check frame components against work instructions for size, number, pattern and finish profile 
Identify and report shortages and defective items in accordance with workplace practice 
Select fixing and joining devices in accordance with work instructions and type of moulding to be joined 
Select and check tools and equipment for suitability, quality, serviceability and safety prior to use 
Plan the work sequence to suit the job 
Lay out components and join using selected equipment, fastenings and appropriate adhesives 
Check assembled frame for alignment, required pattern matching and correct fasteners and attachments 
Finish corners in accordance with workplace requirements 
Inspect completed frames for compliance with quality and work order requirements, and rectify any deficiencies 
Store joined frames in accordance with workplace requirements 
Mark completed work for identification and store in accordance with workplace procedures 
Identify and store items for recycling in accordance with workplace procedures 
Clean work area and safely dispose of rubbish 
Accurately complete required workplace documentation 
Check, clean and store tools and equipment in accordance with workplace procedures 
Read work order and identify joining requirements 
Identify and follow work health safety requirements throughout the work 
Obtain and check frame components against work instructions for size, number, pattern and finish profile 
Identify and report shortages and defective items in accordance with workplace practice 
Select fixing and joining devices in accordance with work instructions and type of moulding to be joined 
Select and check tools and equipment for suitability, quality, serviceability and safety prior to use 
Plan the work sequence to suit the job 
Lay out components and join using selected equipment, fastenings and appropriate adhesives 
Check assembled frame for alignment, required pattern matching and correct fasteners and attachments 
Finish corners in accordance with workplace requirements 
Inspect completed frames for compliance with quality and work order requirements, and rectify any deficiencies 
Store joined frames in accordance with workplace requirements 

Forms

Assessment Cover Sheet

MSFPF2010 - Join mouldings
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

MSFPF2010 - Join mouldings

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: